// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ERC20PermitUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import {UUPSUpgradeable} from "@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol";
import {AccessControlUpgradeable} from "@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol";
import {ReentrancyGuardTransientUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardTransientUpgradeable.sol";

import {ITokiErrors} from "./interfaces/ITokiErrors.sol";
import {IPool} from "./interfaces/IPool.sol";
import {ITransferPoolFeeCalculator} from "./interfaces/ITransferPoolFeeCalculator.sol";

import {DecimalConvertibleUpgradeable} from "./DecimalConvertibleUpgradeable.sol";
import {StaticFlowRateLimiter} from "./StaticFlowRateLimiter.sol";

contract Pool is
    ITokiErrors,
    IPool,
    ERC20PermitUpgradeable,
    UUPSUpgradeable,
    AccessControlUpgradeable,
    DecimalConvertibleUpgradeable,
    ReentrancyGuardTransientUpgradeable,
    StaticFlowRateLimiter
{
    using SafeERC20 for IERC20;

    struct InitializeParam {
        string name;
        string symbol;
        uint256 poolId;
        address token;
        uint8 globalDecimals;
        uint8 localDecimals;
        address feeCalculator;
        address admin;
        address router;
        uint256 maxTotalDeposits; // The maximum deposits that each pool will hold in LD-unit
    }

    /// @custom:storage-location erc7201:toki.storage.Pool
    struct PoolStorage {
        address _feeCalculator;
        // Delta algorithm parameters
        PeerPoolInfo[] _peerPoolInfos; // list of connected chains pool.
        // seek for peerPools by chainId => poolId => index
        mapping(uint256 => mapping(uint256 => uint256)) _peerPoolInfoIndexSeek;
        uint256 _totalLiquidity; // assets deposited.
        // total weight for pools. When calculate proportion of weight, peerPoolInfos[i].weight / totalWeight.
        uint256 _totalWeight;
        uint256 _deltaCredit; // Needs optimization
        bool _batched; // flag indicates whether or not batch processing is performed.
        bool _defaultSwapMode; // flag indicates whether or not the default mode for swap
        bool _defaultLPMode; // flag indicates whether or not the default mode for lp
        uint256 _feeBalance; // fee balance in Global Decimal format.
        uint256 _eqFeePool; // pool rewards in Global Decimal format.
        uint256 _swapDeltaBP; // activate the delta of the swap at the basis point of the pool credit.
        uint256 _lpDeltaBP; // basis points of pooled credit to allow for delta in liquidity events
        uint256 _poolId; // shared id between chains to represent same pool.
        address _token; // the local token for the pool
        // Tip about decimals
        // - amountLP: liquidity provider token (that means this contract) in global decimals units.
        // - amountGD: decimals of shared asset token. eg) 6 decimals, lcm(USDT_eth.decimals(), USDT_bsc.decimals(), ...)
        // - amountLD: decimals of local asset token. eg) 18 decimals(USDT_eth)

        bool _transferStop; // flag to stop transfer in extreme cases
        uint256 _maxTotalDeposits; // The maximum deposits that each pool will hold by LD-unit
    }

    // The maximum number of peer pool.
    // This limitation prevents _deltaSourceUpdate from exceeding the block gas limit.
    // The amount of gas for _deltaSourceUpdate increases by about 20k as peer increases.
    uint256 public constant MAX_PEERS = 100;

    // keccak256(abi.encode(uint256(keccak256("toki.storage.Pool")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant POOL_LOCATION =
        0x98b6721f87b10fba9510649effb5cccfd7d04ba1bf6c44593ef8229732a7ea00;

    bytes32 public constant DEFAULT_ROUTER_ROLE =
        keccak256("DEFAULT_ROUTER_ROLE");

    uint256 public constant BPS_DENOMINATOR = 10000; // basic point denominator

    event SetDstFlowRateLimiter(address dstFlowRateLimiter);

    modifier checkMaxTotalDeposits(uint256 amountAssetLD) {
        PoolStorage storage $ = _getPoolStorage();
        uint256 totalDepositsLD = _GDToLD($._totalLiquidity) + amountAssetLD;
        // Check that the total liquidity does not exceed the maximum total deposits
        if (totalDepositsLD > $._maxTotalDeposits) {
            revert TokiExceed(
                "maxTotalDeposits",
                totalDepositsLD,
                $._maxTotalDeposits
            );
        }

        _;
    }

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor(
        uint256 period,
        uint256 lockPeriod,
        uint256 limit,
        uint256 threshold
    ) StaticFlowRateLimiter(period, lockPeriod, limit, threshold) {}

    // ========================== public functions ===============================
    function initialize(InitializeParam calldata p) public initializer {
        __ERC20_init(p.name, p.symbol);
        __ERC20Permit_init(p.name);
        __UUPSUpgradeable_init();
        __AccessControl_init();
        __DecimalConvertible_init(p.globalDecimals, p.localDecimals);
        __ReentrancyGuardTransient_init();
        __StaticFlowRateLimiter_init_unchained();

        _grantRole(DEFAULT_ADMIN_ROLE, p.admin);
        _grantRole(DEFAULT_ROUTER_ROLE, p.router);

        PoolStorage storage $ = _getPoolStorage();
        $._poolId = p.poolId;

        if (p.token == address(0x0)) {
            revert TokiZeroAddress("token");
        }
        if (p.feeCalculator == address(0x0)) {
            revert TokiZeroAddress("feeCalculator");
        }
        $._token = p.token;
        $._feeCalculator = p.feeCalculator;
        $._maxTotalDeposits = p.maxTotalDeposits;
    }

    // ========================== external functions ===================================
    // for deposit
    function mint(
        address to,
        uint256 amountLD
    ) external nonReentrant onlyRole(DEFAULT_ROUTER_ROLE) returns (uint256) {
        return _mintLPbyLDWithLimitCheck(to, amountLD, true);
    }

    function callDelta(bool fullMode) external onlyRole(DEFAULT_ROUTER_ROLE) {
        _deltaSourceUpdate(fullMode);
    }

    //-----------------------------------------------------------------------------------
    // Admin functions
    //-----------------------------------------------------------------------------------
    function setTransferStop(
        bool transferStop_
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        $._transferStop = transferStop_;
        emit IPool.UpdateStopTransfer($._transferStop);
    }

    function registerPeerPool(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 weight
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        uint256 length = $._peerPoolInfos.length;
        if (MAX_PEERS <= length) {
            revert TokiExceed("PeerPool", length + 1, MAX_PEERS);
        }
        for (uint256 i = 0; i < length; ++i) {
            PeerPoolInfo memory peerPoolInfo = $._peerPoolInfos[i];
            bool exists = peerPoolInfo.chainId == peerChainId &&
                peerPoolInfo.id == peerPoolId;
            if (exists) {
                revert TokiPeerPoolIsRegistered(peerChainId, peerPoolId);
            }
        }
        $._totalWeight = $._totalWeight + weight;
        $._peerPoolInfoIndexSeek[peerChainId][peerPoolId] = $
            ._peerPoolInfos
            .length;
        $._peerPoolInfos.push(
            PeerPoolInfo(peerChainId, peerPoolId, weight, 0, 0, 0, 0, false)
        );
        emit PeerPoolInfoUpdate(peerChainId, peerPoolId, weight);
    }

    function activatePeerPool(
        uint256 peerChainId,
        uint256 peerPoolId
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PeerPoolInfo storage p = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        if (p.ready) {
            revert TokiPeerPoolIsAlreadyActive(peerChainId, peerPoolId);
        }
        p.ready = true;
    }

    function setFeeCalculator(
        address _feeCalculator
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        $._feeCalculator = _feeCalculator;
    }

    function setPeerPoolWeight(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 weight
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        PeerPoolInfo storage p = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        $._totalWeight = $._totalWeight - p.weight + weight;
        p.weight = weight;
        emit PeerPoolInfoUpdate(peerChainId, peerPoolId, weight);
    }

    function setDeltaParam(
        bool batched_,
        uint256 swapDeltaBP_,
        uint256 lpDeltaBP_,
        bool defaultSwapMode_,
        bool defaultLPMode_
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        if (swapDeltaBP_ > BPS_DENOMINATOR) {
            revert TokiExceed("swapDeltaBP", swapDeltaBP_, BPS_DENOMINATOR);
        }
        if (lpDeltaBP_ > BPS_DENOMINATOR) {
            revert TokiExceed("lpDeltaBP", lpDeltaBP_, BPS_DENOMINATOR);
        }
        $._batched = batched_;
        $._swapDeltaBP = swapDeltaBP_;
        $._lpDeltaBP = lpDeltaBP_;
        $._defaultSwapMode = defaultSwapMode_;
        $._defaultLPMode = defaultLPMode_;
        emit UpdateDeltaParam(
            batched_,
            swapDeltaBP_,
            lpDeltaBP_,
            defaultSwapMode_,
            defaultLPMode_
        );
    }

    function drawFee(address to) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        if (to == address(0x0)) {
            revert TokiZeroAddress("to");
        }
        if ($._feeBalance == 0) {
            revert TokiNoFee();
        }
        uint256 amountLD = _GDToLD($._feeBalance);
        $._feeBalance = 0;
        emit DrawFee(to, amountLD);
        _safeTransferWithRevert($._token, to, amountLD);
    }

    function setMaxTotalDeposits(
        uint256 newMaxTotalDeposits
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        emit SetMaxTotalDeposits(newMaxTotalDeposits);
        $._maxTotalDeposits = newMaxTotalDeposits;
    }

    // solhint-disable-next-line func-name-mixedcase
    function LPToLD(uint256 amountLP) external view returns (uint256) {
        return _GDToLD(_LPToGD(amountLP));
    }

    // solhint-disable-next-line func-name-mixedcase
    function LDToLP(uint256 _amountLD) external view returns (uint256) {
        return _GDToLP(_LDToGD(_amountLD));
    }

    function getPeerPoolInfo(
        uint256 peerChainId,
        uint256 peerPoolId
    ) external view returns (PeerPoolInfo memory) {
        return _getAndCheckPeerPoolInfo(peerChainId, peerPoolId);
    }

    function calcFee(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLD
    )
        external
        view
        returns (ITransferPoolFeeCalculator.FeeInfo memory feeInfo)
    {
        PoolStorage storage $ = _getPoolStorage();
        PeerPoolInfo storage peerPoolInfo = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        uint256 amountGD = _LDToGD(amountLD);

        ITransferPoolFeeCalculator.SrcPoolInfo
            memory myPoolInfo = ITransferPoolFeeCalculator.SrcPoolInfo({
                addr: address(this),
                id: $._poolId,
                globalDecimals: globalDecimals(),
                balance: tokenBalanceOfThisPoolInGD(),
                totalLiquidity: $._totalLiquidity,
                eqFeePool: $._eqFeePool
            });

        // fee calculate
        return
            ITransferPoolFeeCalculator($._feeCalculator).calcFee(
                myPoolInfo,
                peerPoolInfo,
                from,
                amountGD
            );
    }

    function transfer(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLD,
        uint256 minAmountLD,
        bool newLiquidity
    )
        public
        nonReentrant
        onlyRole(DEFAULT_ROUTER_ROLE)
        returns (ITransferPoolFeeCalculator.FeeInfo memory feeInfo)
    {
        PoolStorage storage $ = _getPoolStorage();
        if ($._transferStop) {
            revert TokiTransferIsStop();
        }
        if (from == address(0x0)) {
            revert TokiZeroAddress("from");
        }
        PeerPoolInfo storage peerPoolInfo = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        if (peerPoolInfo.ready != true) {
            revert TokiPeerPoolIsNotReady(peerChainId, peerPoolId);
        }

        uint256 amountGD = _LDToGD(amountLD);
        uint256 minAmountGD = _LDToGD(minAmountLD);

        ITransferPoolFeeCalculator.SrcPoolInfo
            memory myPoolInfo = ITransferPoolFeeCalculator.SrcPoolInfo({
                addr: address(this),
                id: $._poolId,
                globalDecimals: globalDecimals(),
                balance: tokenBalanceOfThisPoolInGD(),
                totalLiquidity: $._totalLiquidity,
                eqFeePool: $._eqFeePool
            });

        // fee calculate
        feeInfo = ITransferPoolFeeCalculator($._feeCalculator).calcFee(
            myPoolInfo,
            peerPoolInfo,
            from,
            amountGD
        );

        // Note about slither-disable:
        //   no need to check amountGD is less than 0 because it is unsigned.
        // slither-disable-next-line incorrect-equality
        if (0 == feeInfo.amountGD) {
            // Although the calculation of 'needed' is somewhat specific,
            // it remains stable as long as the fee structure doesn't change.
            revert TokiInsufficientAmount(
                "amountLD",
                amountLD,
                feeInfo.eqFee + feeInfo.protocolFee + feeInfo.lpFee + 1
            );
        }
        //Slippage check uses eq fee and eq reward. We don't use predictable protocol fee and LP fee.
        if (amountGD + feeInfo.eqReward - feeInfo.eqFee < minAmountGD) {
            revert TokiSlippageTooHigh(
                amountGD,
                feeInfo.eqReward,
                feeInfo.eqFee,
                minAmountGD
            );
        }

        if (feeInfo.eqReward > 0) {
            $._eqFeePool -= feeInfo.eqReward;
        }
        feeInfo.balanceDecrease = amountGD - feeInfo.lpFee + feeInfo.eqReward;

        // delta algorithm 1-5 lines
        if (peerPoolInfo.balance < feeInfo.balanceDecrease) {
            revert TokiInsufficientPoolLiquidity(
                peerPoolInfo.balance,
                feeInfo.balanceDecrease
            );
        }
        peerPoolInfo.balance = peerPoolInfo.balance - feeInfo.balanceDecrease;

        if (newLiquidity) {
            $._deltaCredit = $._deltaCredit + amountGD + feeInfo.eqReward;
        } else if (feeInfo.eqReward > 0) {
            $._deltaCredit = $._deltaCredit + feeInfo.eqReward;
        }

        // delta algportm 6-16 lines
        if (
            !$._batched ||
            $._deltaCredit >=
            ($._totalLiquidity * $._swapDeltaBP) / BPS_DENOMINATOR
        ) {
            _deltaSourceUpdate($._defaultSwapMode);
        }

        // delta algorithm 17-20 lines -> sendCredit

        emit Transfer(
            peerChainId,
            peerPoolId,
            from,
            feeInfo.amountGD,
            feeInfo.eqReward,
            feeInfo.eqFee,
            feeInfo.protocolFee,
            feeInfo.lpFee
        );
    }

    function recv(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        ITransferPoolFeeCalculator.FeeInfo memory feeInfo,
        bool updateDelta
    )
        public
        nonReentrant
        onlyRole(DEFAULT_ROUTER_ROLE)
        returns (uint256 amountLD, bool isTransferred)
    {
        PoolStorage storage $ = _getPoolStorage();
        if (updateDelta) {
            _recvFees($, feeInfo);
            // delta algorithm 21-24 lines -> updateCredit
            _decreaseLastKnownBalance(
                peerChainId,
                peerPoolId,
                feeInfo.balanceDecrease
            );
        }

        // user receives the amount + the srcReward
        amountLD = _GDToLD(feeInfo.amountGD + feeInfo.eqReward);
        bool passed = true;
        if (peerChainId != block.chainid) {
            passed = _checkAndUpdateFlowRateLimit(amountLD);
        }

        if (passed && _safeTransfer($._token, to, amountLD)) {
            isTransferred = true;

            emit Recv(
                to,
                feeInfo.amountGD + feeInfo.eqReward,
                feeInfo.protocolFee,
                feeInfo.eqFee
            );
        } else {
            _cancelFlowRateLimit();
        }
    }

    function withdrawRemote(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLP
    ) public nonReentrant onlyRole(DEFAULT_ROUTER_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        if (from == address(0x0)) {
            revert TokiZeroAddress("from");
        }
        // 1. burn lp token on local
        uint256 amountGD = _burnLP(from, amountLP);
        // 2. run delta common function
        if (
            !$._batched ||
            $._deltaCredit >
            ($._totalLiquidity * $._lpDeltaBP) / BPS_DENOMINATOR
        ) {
            _deltaSourceUpdate($._defaultLPMode);
        }
        uint256 amountLD = _GDToLD(amountGD);
        // 3. emit withdrawRemote event
        emit WithdrawRemote(peerChainId, peerPoolId, from, amountLP, amountLD);
    }

    function withdrawLocal(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLP,
        bytes calldata to
    )
        public
        nonReentrant
        onlyRole(DEFAULT_ROUTER_ROLE)
        returns (uint256 amountGD)
    {
        PoolStorage storage $ = _getPoolStorage();
        if (from == address(0x0)) {
            revert TokiZeroAddress("from");
        }
        // 1. burn lp token on local
        if (_getAndCheckPeerPoolInfo(peerChainId, peerPoolId).ready != true) {
            revert TokiPeerPoolIsNotReady(peerChainId, peerPoolId);
        }
        amountGD = _burnLP(from, amountLP);

        // 2. run delta common function
        if (
            !$._batched ||
            $._deltaCredit >
            ($._totalLiquidity * $._lpDeltaBP) / BPS_DENOMINATOR
        ) {
            _deltaSourceUpdate(false);
        }

        // 3. emit withdrawLocal event
        emit WithdrawLocal(
            peerChainId,
            peerPoolId,
            from,
            amountLP,
            amountGD,
            to
        );
    }

    function withdrawCheck(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 amountGD
    )
        public
        nonReentrant
        onlyRole(DEFAULT_ROUTER_ROLE)
        returns (uint256 amountSwap, uint256 amountMint)
    {
        PeerPoolInfo storage peerPoolInfo = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        if (amountGD > peerPoolInfo.balance) {
            amountMint = amountGD - peerPoolInfo.balance;
            amountSwap = peerPoolInfo.balance;
            peerPoolInfo.balance = 0;
        } else {
            peerPoolInfo.balance = peerPoolInfo.balance - amountGD;
            amountSwap = amountGD;
            amountMint = 0;
        }
        emit WithdrawCheck(peerChainId, peerPoolId, amountSwap, amountMint);
    }

    /**
     * @dev even when updateDelta is true, lp token will not be re-minted if to is zero address.
     */
    function withdrawConfirm(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        uint256 amountGD,
        uint256 amountToMintGD,
        bool updateDelta
    )
        public
        nonReentrant
        onlyRole(DEFAULT_ROUTER_ROLE)
        returns (bool isTransferred)
    {
        if (updateDelta) {
            // 1. mint lp token on local if possible
            if (amountToMintGD > 0 && to != address(0x0)) {
                _mintLPbyLD(to, _GDToLD(amountToMintGD), false);
            }
            // 2. update last known balance
            _decreaseLastKnownBalance(peerChainId, peerPoolId, amountGD);
        }

        // 3. transfer asset token to _to
        uint256 amountLD = _GDToLD(amountGD);
        bool passed = true;
        if (peerChainId != block.chainid) {
            passed = _checkAndUpdateFlowRateLimit(amountLD);
        }

        PoolStorage storage $ = _getPoolStorage();
        if (passed && _safeTransfer($._token, to, amountLD)) {
            isTransferred = true;

            emit WithdrawConfirm(
                peerChainId,
                peerPoolId,
                to,
                amountGD,
                amountToMintGD
            );
        } else {
            _cancelFlowRateLimit();
        }
    }

    function sendCredit(
        uint256 peerChainId,
        uint256 peerPoolId
    )
        public
        nonReentrant
        onlyRole(DEFAULT_ROUTER_ROLE)
        returns (CreditInfo memory creditInfo)
    {
        PoolStorage storage $ = _getPoolStorage();
        PeerPoolInfo storage peerPoolInfo = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        if (peerPoolInfo.ready != true) {
            revert TokiPeerPoolIsNotReady(peerChainId, peerPoolId);
        }

        creditInfo.targetBalance =
            ($._totalLiquidity * peerPoolInfo.weight) /
            $._totalWeight;
        creditInfo.credits = peerPoolInfo.credits;
        // delta algorithm 17-20 lines
        peerPoolInfo.lastKnownBalance =
            peerPoolInfo.lastKnownBalance +
            peerPoolInfo.credits;
        peerPoolInfo.credits = 0;
        emit SendCredit(
            peerPoolId,
            creditInfo.credits,
            creditInfo.targetBalance
        );
    }

    function updateCredit(
        uint256 peerChainId,
        uint256 peerPoolId,
        CreditInfo memory creditInfo
    ) public nonReentrant onlyRole(DEFAULT_ROUTER_ROLE) {
        PeerPoolInfo storage peerPoolInfo = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        peerPoolInfo.balance = peerPoolInfo.balance + creditInfo.credits;
        if (peerPoolInfo.targetBalance != creditInfo.targetBalance) {
            peerPoolInfo.targetBalance = creditInfo.targetBalance;
        }
        emit UpdateCredit(
            peerChainId,
            peerPoolId,
            creditInfo.credits,
            creditInfo.targetBalance
        );
    }

    function withdrawInstant(
        address from,
        uint256 amountLP,
        address to
    )
        public
        nonReentrant
        onlyRole(DEFAULT_ROUTER_ROLE)
        returns (uint256 amountGD)
    {
        PoolStorage storage $ = _getPoolStorage();
        if (from == address(0x0)) {
            revert TokiZeroAddress("from");
        }
        uint256 deltaCredit_ = $._deltaCredit; // sload optimization.
        uint256 capAmountLP = _GDToLP(deltaCredit_);

        if (amountLP > capAmountLP) amountLP = capAmountLP;

        amountGD = _burnLP(from, amountLP);
        $._deltaCredit = deltaCredit_ - amountGD;
        uint256 amountLD = _GDToLD(amountGD);
        _safeTransferWithRevert($._token, to, amountLD);
        emit WithdrawInstant(from, amountLP, amountGD, to);
    }

    /**
     * @dev Receives delta info and fees from the peer pool to keep the delta consistent.
     */
    function handleRecvFailure(
        uint256 peerChainId,
        uint256 peerPoolId,
        address /* to */,
        ITransferPoolFeeCalculator.FeeInfo memory feeInfo
    ) public nonReentrant onlyRole(DEFAULT_ROUTER_ROLE) {
        PoolStorage storage $ = _getPoolStorage();
        _recvFees($, feeInfo);
        _decreaseLastKnownBalance(
            peerChainId,
            peerPoolId,
            feeInfo.balanceDecrease
        );
    }

    /**
     * @dev Receive delta info ( and re-mint lp token ) to keep the delta consistent.
     */
    function handleWithdrawConfirmFailure(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        uint256 amountGD,
        uint256 amountToMintGD
    ) public nonReentrant onlyRole(DEFAULT_ROUTER_ROLE) {
        // 1. mint lp token on local if possible
        if (amountToMintGD > 0 && to != address(0x0)) {
            _mintLPbyLD(to, _GDToLD(amountToMintGD), false);
        }
        // 2. update last known balance
        _decreaseLastKnownBalance(peerChainId, peerPoolId, amountGD);
    }

    // ========================== view functions ===================================

    function feeCalculator() public view returns (address) {
        return _getPoolStorage()._feeCalculator;
    }

    function peerPoolInfos(
        uint256 index
    ) public view returns (PeerPoolInfo memory) {
        return _getPoolStorage()._peerPoolInfos[index];
    }

    function peerPoolInfoIndexSeek(
        uint256 peerChainId,
        uint256 peerPoolId
    ) public view returns (uint256) {
        return
            _getPoolStorage()._peerPoolInfoIndexSeek[peerChainId][peerPoolId];
    }

    function totalLiquidity() public view returns (uint256) {
        return _getPoolStorage()._totalLiquidity;
    }

    function totalWeight() public view returns (uint256) {
        return _getPoolStorage()._totalWeight;
    }

    function deltaCredit() public view returns (uint256) {
        return _getPoolStorage()._deltaCredit;
    }

    function batched() public view returns (bool) {
        return _getPoolStorage()._batched;
    }

    function defaultSwapMode() public view returns (bool) {
        return _getPoolStorage()._defaultSwapMode;
    }

    function defaultLPMode() public view returns (bool) {
        return _getPoolStorage()._defaultLPMode;
    }

    function feeBalance() public view returns (uint256) {
        return _getPoolStorage()._feeBalance;
    }

    function eqFeePool() public view returns (uint256) {
        return _getPoolStorage()._eqFeePool;
    }

    function swapDeltaBP() public view returns (uint256) {
        return _getPoolStorage()._swapDeltaBP;
    }

    function lpDeltaBP() public view returns (uint256) {
        return _getPoolStorage()._lpDeltaBP;
    }

    function poolId() public view returns (uint256) {
        return _getPoolStorage()._poolId;
    }

    function token() public view returns (address) {
        return _getPoolStorage()._token;
    }

    function transferStop() public view returns (bool) {
        return _getPoolStorage()._transferStop;
    }

    function maxTotalDeposits() public view returns (uint256) {
        return _getPoolStorage()._maxTotalDeposits;
    }

    // ========================== override functions ===============================
    function decimals() public view virtual override returns (uint8) {
        return globalDecimals();
    }

    // ========================== internal functions ===============================
    //-----------------------------------------------------------------------------------
    // heavily used functions
    //-----------------------------------------------------------------------------------
    function _safeTransferWithRevert(
        address token_,
        address to,
        uint256 value
    ) internal {
        if (!_safeTransfer(token_, to, value)) {
            revert TokiTransferIsFailed(token_, to, value);
        }
    }

    function _safeTransfer(
        address token_,
        address to,
        uint256 value
    ) internal returns (bool) {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = token_.call(
            abi.encodeCall(IERC20(token_).transfer, (to, value))
        );
        if (success && returndata.length != 0) {
            return abi.decode(returndata, (bool));
        }
        return success;
    }

    function _mintLPbyLD(
        address to,
        uint256 amountLD,
        bool creditDelta
    ) internal returns (uint256 amountAssetGD) {
        PoolStorage storage $ = _getPoolStorage();
        if ($._totalWeight == 0) {
            revert TokiZeroValue("totalWeight");
        }
        amountAssetGD = _LDToGD(amountLD);

        if (creditDelta) {
            $._deltaCredit = $._deltaCredit + amountAssetGD;
        }

        uint256 amountLPTokens = amountAssetGD;
        if (totalSupply() != 0) {
            amountLPTokens =
                (amountAssetGD * totalSupply()) /
                $._totalLiquidity;
        }
        $._totalLiquidity = $._totalLiquidity + amountAssetGD;

        _mint(to, amountLPTokens);
        emit Mint(to, amountLPTokens, amountAssetGD);

        if (
            !$._batched ||
            $._deltaCredit >
            ($._totalLiquidity * $._lpDeltaBP) / BPS_DENOMINATOR
        ) {
            _deltaSourceUpdate($._defaultLPMode);
        }
    }

    function _mintLPbyLDWithLimitCheck(
        address to,
        uint256 amountLD,
        bool creditDelta
    ) internal checkMaxTotalDeposits(amountLD) returns (uint256 amountAssetGD) {
        return _mintLPbyLD(to, amountLD, creditDelta);
    }

    function _burnLP(
        address from,
        uint256 amountLP
    ) internal returns (uint256) {
        PoolStorage storage $ = _getPoolStorage();
        if (totalSupply() == 0) {
            revert TokiZeroValue("totalSupply");
        }
        uint256 balance = balanceOf(from);
        if (balance < amountLP) {
            revert TokiExceed("Pool._burnLP.amountLP", amountLP, balance);
        }

        uint256 amountGD = (amountLP * $._totalLiquidity) / totalSupply();

        $._totalLiquidity = $._totalLiquidity - amountGD;

        _burn(from, amountLP);
        emit Burn(from, amountLP, amountGD);
        return amountGD;
    }

    /**
     * @dev  _deltaSourceUpdate implements the delta algorithm, and balances liquidity across peer pools on different chains is only done
     * if there's positive deltaCredit and totalWeight.
     *
     * The following steps are done when deltaSourceUpdate is done:
     * 1: Difference Calculation
     * The difference between the ideal balance (balLiq) and current balance (currLiq) for each peer pool is calculated.
     * The sum of the total difference (totalDiff) is also calculated.
     * 2 : Credit Distribution
     * Handles three scenarios based on the relationship between totalDiff and deltaCredit:
     * - Scenario 1: If totalDiff is 0:
     * In fullMode, distributes excess credits proportionally based on weights. Otherwise, nothing is done.
     * - Scenario 2: If deltaCredit is lesser than totalDiff:
     * Calculates the differences based on available deltaCredit, and distributes credits proportionally to the normalized differences.
     * Updates the credits for each peer pool based on the calculated distribution.
     * - Scenario 3: If deltaCredit is greater than or equal to totalDiff:
     * In fullMode, distributes all differences plus excess credits proportionally. Otherwise, it distributes only the calculated differences.
     * Updates the credits for each peer pool based on the calculated distribution.
     * 3. Delta Credit Update:
     * Reduces deltaCredit by the total amount spent.
     */
    function _deltaSourceUpdate(bool fullMode) internal {
        PoolStorage storage $ = _getPoolStorage();
        if ($._deltaCredit > 0 && $._totalWeight > 0) {
            uint256 peerPoolInfosLength = $._peerPoolInfos.length;
            uint256[] memory diff = new uint256[](peerPoolInfosLength);
            uint256 totalDiff = 0;

            // delta algorithm 6-9 lines
            for (uint256 i = 0; i < peerPoolInfosLength; ++i) {
                PeerPoolInfo storage peerPoolInfo = $._peerPoolInfos[i];
                // (totalLiquidity * (weight/totalWeight)) - (lastKnownBalance+credits)
                uint256 balLiq = ($._totalLiquidity * peerPoolInfo.weight) /
                    $._totalWeight;
                uint256 currLiq = peerPoolInfo.lastKnownBalance +
                    peerPoolInfo.credits;
                // max(0, lp_s * w_{s,x} − (lkb_{x,s} + c_{s,x}))
                if (balLiq > currLiq) {
                    diff[i] = balLiq - currLiq;
                    totalDiff = totalDiff + diff[i];
                }
            }
            // Indicates how much deltacredit is spent.
            uint256 spent = 0;

            if (totalDiff == 0) {
                // If fullMode delta will use excess credits
                if (fullMode && $._deltaCredit > 0) {
                    for (uint256 i = 0; i < peerPoolInfosLength; ++i) {
                        PeerPoolInfo storage peerPoolInfo = $._peerPoolInfos[i];
                        // same as delta algorithm 10-12 lines: diff_{s,x} <- min(Total,t) * diff_{s,x} / totalDiff
                        uint256 amtToCredit = ($._deltaCredit *
                            peerPoolInfo.weight) / $._totalWeight;
                        spent = spent + amtToCredit;
                        peerPoolInfo.credits =
                            peerPoolInfo.credits +
                            amtToCredit;
                    }
                } // else do nth
            } else if ($._deltaCredit < totalDiff) {
                // deltaCredit < totalDiff , fullMode or not, normalize the diff by deltaCredit
                for (uint256 i = 0; i < peerPoolInfosLength; ++i) {
                    if (diff[i] > 0) {
                        PeerPoolInfo storage peerPoolInfo = $._peerPoolInfos[i];
                        // delta algorithm 10-12 lines: diff_{s,x} <- min(Total,t) * diff_{s,x} / totalDiff
                        diff[i] = (diff[i] * $._deltaCredit) / totalDiff;
                        // delta algorithm 13-16 lines:
                        spent = spent + diff[i];
                        peerPoolInfo.credits = peerPoolInfo.credits + diff[i];
                    }
                }
            } else {
                // totalDiff <= deltaCredit
                // delta algorithm 13-16 lines:
                if (fullMode) {
                    uint256 excessCredit = $._deltaCredit - totalDiff;
                    for (uint256 i = 0; i < peerPoolInfosLength; ++i) {
                        PeerPoolInfo storage peerPoolInfo = $._peerPoolInfos[i];
                        // credits = credits + diff[i] + exceedCredit * (weight / totalWeight)
                        uint256 amtToCredit = diff[i] +
                            (excessCredit * peerPoolInfo.weight) /
                            $._totalWeight;
                        spent = spent + amtToCredit;
                        peerPoolInfo.credits =
                            peerPoolInfo.credits +
                            amtToCredit;
                    }
                } else {
                    // totaldiff <= deltaCredit but not running fullMode
                    // A diff in peerPool, credit it as is and do not use all deltaCredit.
                    for (uint256 i = 0; i < peerPoolInfosLength; ++i) {
                        if (diff[i] > 0) {
                            PeerPoolInfo storage peerPoolInfo = $
                                ._peerPoolInfos[i];
                            spent = spent + diff[i];
                            peerPoolInfo.credits =
                                peerPoolInfo.credits +
                                diff[i];
                        }
                    }
                }
            }

            // deltaCredit spent.
            $._deltaCredit = $._deltaCredit - spent;
        }
    }

    function _decreaseLastKnownBalance(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 amountGD
    ) internal {
        PeerPoolInfo storage peerPoolInfo = _getAndCheckPeerPoolInfo(
            peerChainId,
            peerPoolId
        );
        peerPoolInfo.lastKnownBalance =
            peerPoolInfo.lastKnownBalance -
            amountGD;
    }

    function _recvFees(
        PoolStorage storage $,
        ITransferPoolFeeCalculator.FeeInfo memory feeInfo
    ) internal {
        $._totalLiquidity += feeInfo.lpFee;
        $._eqFeePool += feeInfo.eqFee;
        $._feeBalance += feeInfo.protocolFee;
    }

    function _authorizeUpgrade(
        address
    ) internal override onlyRole(DEFAULT_ADMIN_ROLE) {}

    //-----------------------------------------------------------------------------------
    // Helper functions
    //-----------------------------------------------------------------------------------
    function _getAndCheckPeerPoolInfo(
        uint256 peerChainId,
        uint256 peerPoolId
    ) internal view returns (PeerPoolInfo storage peerPoolInfo) {
        PoolStorage storage $ = _getPoolStorage();
        if ($._peerPoolInfos.length == 0) {
            revert TokiNoPeerPoolInfo();
        }
        peerPoolInfo = $._peerPoolInfos[
            $._peerPoolInfoIndexSeek[peerChainId][peerPoolId]
        ];
        if (
            peerPoolInfo.chainId != peerChainId || peerPoolInfo.id != peerPoolId
        ) {
            revert TokiPeerPoolInfoNotFound(peerChainId, peerPoolId);
        }
    }

    // solhint-disable-next-line func-name-mixedcase
    function _LPToGD(uint256 amountLP) internal view returns (uint256) {
        PoolStorage storage $ = _getPoolStorage();
        if (totalSupply() == 0) {
            revert TokiZeroValue("totalSupply");
        }
        return (amountLP * $._totalLiquidity) / totalSupply();
    }

    // solhint-disable-next-line func-name-mixedcase
    function _GDToLP(uint256 amountGD) internal view returns (uint256) {
        PoolStorage storage $ = _getPoolStorage();
        if ($._totalLiquidity == 0) {
            revert TokiZeroValue("totalLiquidity");
        }
        return (amountGD * totalSupply()) / $._totalLiquidity;
    }

    function tokenBalanceOfThisPoolInGD() internal view returns (uint256) {
        PoolStorage storage $ = _getPoolStorage();
        return _LDToGD(IERC20($._token).balanceOf(address(this)));
    }

    function _getPoolStorage() private pure returns (PoolStorage storage $) {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            $.slot := POOL_LOCATION
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "@openzeppelin/contracts/access/IAccessControl.sol";
import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {ERC165Upgradeable} from "../utils/introspection/ERC165Upgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControl, ERC165Upgradeable {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;


    /// @custom:storage-location erc7201:openzeppelin.storage.AccessControl
    struct AccessControlStorage {
        mapping(bytes32 role => RoleData) _roles;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.AccessControl")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant AccessControlStorageLocation = 0x02dd7bc7dec4dceedda775e58dd541e08a116c6c53815c0bd028192f7b626800;

    function _getAccessControlStorage() private pure returns (AccessControlStorage storage $) {
        assembly {
            $.slot := AccessControlStorageLocation
        }
    }

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    function __AccessControl_init() internal onlyInitializing {
    }

    function __AccessControl_init_unchained() internal onlyInitializing {
    }
    /// @inheritdoc IERC165
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        AccessControlStorage storage $ = _getAccessControlStorage();
        bytes32 previousAdminRole = getRoleAdmin(role);
        $._roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (!hasRole(role, account)) {
            $._roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` from `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (hasRole(role, account)) {
            $._roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reinitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.
     *
     * NOTE: Consider following the ERC-7201 formula to derive storage locations.
     */
    function _initializableStorageSlot() internal pure virtual returns (bytes32) {
        return INITIALIZABLE_STORAGE;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        bytes32 slot = _initializableStorageSlot();
        assembly {
            $.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/UUPSUpgradeable.sol)

pragma solidity ^0.8.22;

import {IERC1822Proxiable} from "@openzeppelin/contracts/interfaces/draft-IERC1822.sol";
import {ERC1967Utils} from "@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol";
import {Initializable} from "./Initializable.sol";

/**
 * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an
 * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.
 *
 * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is
 * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing
 * `UUPSUpgradeable` with a custom implementation of upgrades.
 *
 * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.
 */
abstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable __self = address(this);

    /**
     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`
     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,
     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.
     * If the getter returns `"5.0.0"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must
     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function
     * during an upgrade.
     */
    string public constant UPGRADE_INTERFACE_VERSION = "5.0.0";

    /**
     * @dev The call is from an unauthorized context.
     */
    error UUPSUnauthorizedCallContext();

    /**
     * @dev The storage `slot` is unsupported as a UUID.
     */
    error UUPSUnsupportedProxiableUUID(bytes32 slot);

    /**
     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is
     * a proxy contract with an implementation (as defined in ERC-1967) pointing to self. This should only be the case
     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a
     * function through ERC-1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to
     * fail.
     */
    modifier onlyProxy() {
        _checkProxy();
        _;
    }

    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        _checkNotDelegated();
        _;
    }

    function __UUPSUpgradeable_init() internal onlyInitializing {
    }

    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Implementation of the ERC-1822 {proxiableUUID} function. This returns the storage slot used by the
     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.
     */
    function proxiableUUID() external view virtual notDelegated returns (bytes32) {
        return ERC1967Utils.IMPLEMENTATION_SLOT;
    }

    /**
     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call
     * encoded in `data`.
     *
     * Calls {_authorizeUpgrade}.
     *
     * Emits an {Upgraded} event.
     *
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallUUPS(newImplementation, data);
    }

    /**
     * @dev Reverts if the execution is not performed via delegatecall or the execution
     * context is not of a proxy with an ERC-1967 compliant implementation pointing to self.
     */
    function _checkProxy() internal view virtual {
        if (
            address(this) == __self || // Must be called through delegatecall
            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy
        ) {
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Reverts if the execution is performed via delegatecall.
     * See {notDelegated}.
     */
    function _checkNotDelegated() internal view virtual {
        if (address(this) != __self) {
            // Must not be called through delegatecall
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by
     * {upgradeToAndCall}.
     *
     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.
     *
     * ```solidity
     * function _authorizeUpgrade(address) internal onlyOwner {}
     * ```
     */
    function _authorizeUpgrade(address newImplementation) internal virtual;

    /**
     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.
     *
     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value
     * is expected to be the implementation slot in ERC-1967.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {
        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {
                revert UUPSUnsupportedProxiableUUID(slot);
            }
            ERC1967Utils.upgradeToAndCall(newImplementation, data);
        } catch {
            // The implementation is not UUPS
            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20
    struct ERC20Storage {
        mapping(address account => uint256) _balances;

        mapping(address account => mapping(address spender => uint256)) _allowances;

        uint256 _totalSupply;

        string _name;
        string _symbol;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;

    function _getERC20Storage() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * Both values are immutable: they can only be set once during construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC20Storage storage $ = _getERC20Storage();
        $._name = name_;
        $._symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /// @inheritdoc IERC20
    function totalSupply() public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._totalSupply;
    }

    /// @inheritdoc IERC20
    function balanceOf(address account) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /// @inheritdoc IERC20
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            $._totalSupply += value;
        } else {
            uint256 fromBalance = $._balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                $._balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                $._totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                $._balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        $._allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import {EIP712Upgradeable} from "../../../utils/cryptography/EIP712Upgradeable.sol";
import {NoncesUpgradeable} from "../../../utils/NoncesUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20PermitUpgradeable is Initializable, ERC20Upgradeable, IERC20Permit, EIP712Upgradeable, NoncesUpgradeable {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC-20 token name.
     */
    function __ERC20Permit_init(string memory name) internal onlyInitializing {
        __EIP712_init_unchained(name, "1");
    }

    function __ERC20Permit_init_unchained(string memory) internal onlyInitializing {}

    /// @inheritdoc IERC20Permit
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /// @inheritdoc IERC20Permit
    function nonces(address owner) public view virtual override(IERC20Permit, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }

    /// @inheritdoc IERC20Permit
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import {IERC5267} from "@openzeppelin/contracts/interfaces/IERC5267.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: The upgradeable version of this contract does not use an immutable cache and recomputes the domain separator
 * each time {_domainSeparatorV4} is called. That is cheaper than accessing a cached version in cold storage.
 */
abstract contract EIP712Upgradeable is Initializable, IERC5267 {
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712
    struct EIP712Storage {
        /// @custom:oz-renamed-from _HASHED_NAME
        bytes32 _hashedName;
        /// @custom:oz-renamed-from _HASHED_VERSION
        bytes32 _hashedVersion;

        string _name;
        string _version;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;

    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {
        assembly {
            $.slot := EIP712StorageLocation
        }
    }

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {
        __EIP712_init_unchained(name, version);
    }

    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {
        EIP712Storage storage $ = _getEIP712Storage();
        $._name = name;
        $._version = version;

        // Reset prior values in storage if upgrading
        $._hashedName = 0;
        $._hashedVersion = 0;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        return _buildDomainSeparator();
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /// @inheritdoc IERC5267
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        EIP712Storage storage $ = _getEIP712Storage();
        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized
        // and the EIP712 domain is not reliable, as it will be missing name and version.
        require($._hashedName == 0 && $._hashedVersion == 0, "EIP712: Uninitialized");

        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Name() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._name;
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Version() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._version;
    }

    /**
     * @dev The hash of the name parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.
     */
    function _EIP712NameHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory name = _EIP712Name();
        if (bytes(name).length > 0) {
            return keccak256(bytes(name));
        } else {
            // If the name is empty, the contract may have been upgraded without initializing the new storage.
            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.
            bytes32 hashedName = $._hashedName;
            if (hashedName != 0) {
                return hashedName;
            } else {
                return keccak256("");
            }
        }
    }

    /**
     * @dev The hash of the version parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.
     */
    function _EIP712VersionHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory version = _EIP712Version();
        if (bytes(version).length > 0) {
            return keccak256(bytes(version));
        } else {
            // If the version is empty, the contract may have been upgraded without initializing the new storage.
            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.
            bytes32 hashedVersion = $._hashedVersion;
            if (hashedVersion != 0) {
                return hashedVersion;
            } else {
                return keccak256("");
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165Upgradeable is Initializable, IERC165 {
    function __ERC165_init() internal onlyInitializing {
    }

    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /// @inheritdoc IERC165
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract NoncesUpgradeable is Initializable {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    /// @custom:storage-location erc7201:openzeppelin.storage.Nonces
    struct NoncesStorage {
        mapping(address account => uint256) _nonces;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Nonces")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant NoncesStorageLocation = 0x5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb00;

    function _getNoncesStorage() private pure returns (NoncesStorage storage $) {
        assembly {
            $.slot := NoncesStorageLocation
        }
    }

    function __Nonces_init() internal onlyInitializing {
    }

    function __Nonces_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        return $._nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return $._nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/ReentrancyGuardTransient.sol)

pragma solidity ^0.8.24;

import {TransientSlot} from "@openzeppelin/contracts/utils/TransientSlot.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Variant of {ReentrancyGuard} that uses transient storage.
 *
 * NOTE: This variant only works on networks where EIP-1153 is available.
 *
 * _Available since v5.1._
 */
abstract contract ReentrancyGuardTransientUpgradeable is Initializable {
    using TransientSlot for *;

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ReentrancyGuard")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant REENTRANCY_GUARD_STORAGE =
        0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function __ReentrancyGuardTransient_init() internal onlyInitializing {
    }

    function __ReentrancyGuardTransient_init_unchained() internal onlyInitializing {
    }
    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, REENTRANCY_GUARD_STORAGE.asBoolean().tload() will be false
        if (_reentrancyGuardEntered()) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        REENTRANCY_GUARD_STORAGE.asBoolean().tstore(true);
    }

    function _nonReentrantAfter() private {
        REENTRANCY_GUARD_STORAGE.asBoolean().tstore(false);
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return REENTRANCY_GUARD_STORAGE.asBoolean().tload();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (access/IAccessControl.sol)

pragma solidity >=0.8.4;

/**
 * @dev External interface of AccessControl declared to support ERC-165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted to signal this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).
     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC1822.sol)

pragma solidity >=0.4.16;

/**
 * @dev ERC-1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC6093.sol)
pragma solidity >=0.8.4;

/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC-721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC-1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)

pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)

pragma solidity >=0.4.16;

import {IERC165} from "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1967.sol)

pragma solidity >=0.4.11;

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)

pragma solidity >=0.4.16;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC5267.sol)

pragma solidity >=0.4.16;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (proxy/beacon/IBeacon.sol)

pragma solidity >=0.4.16;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (proxy/ERC1967/ERC1967Utils.sol)

pragma solidity ^0.8.21;

import {IBeacon} from "../beacon/IBeacon.sol";
import {IERC1967} from "../../interfaces/IERC1967.sol";
import {Address} from "../../utils/Address.sol";
import {StorageSlot} from "../../utils/StorageSlot.sol";

/**
 * @dev This library provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots.
 */
library ERC1967Utils {
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);

    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);

    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);

    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();

    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit IERC1967.Upgraded(newImplementation);

        if (data.length > 0) {
            Address.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit IERC1967.AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the ERC-1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }

        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;

        address beaconImplementation = IBeacon(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }

    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit IERC1967.BeaconUpgraded(newBeacon);

        if (data.length > 0) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity >=0.6.2;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/Address.sol)

pragma solidity ^0.8.20;

import {Errors} from "./Errors.sol";

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert Errors.InsufficientBalance(address(this).balance, amount);
        }

        (bool success, bytes memory returndata) = recipient.call{value: amount}("");
        if (!success) {
            _revert(returndata);
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {Errors.FailedCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert Errors.InsufficientBalance(address(this).balance, value);
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
     * of an unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {Errors.FailedCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            assembly ("memory-safe") {
                revert(add(returndata, 0x20), mload(returndata))
            }
        } else {
            revert Errors.FailedCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(
        bytes32 hash,
        bytes memory signature
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly ("memory-safe") {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[ERC-191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Variant of {toDataWithIntendedValidatorHash-address-bytes} optimized for cases where `data` is a bytes32.
     */
    function toDataWithIntendedValidatorHash(
        address validator,
        bytes32 messageHash
    ) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, hex"19_00")
            mstore(0x02, shl(96, validator))
            mstore(0x16, messageHash)
            digest := keccak256(0x00, 0x36)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (ERC-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of common custom errors used in multiple contracts
 *
 * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
 * It is recommended to avoid relying on the error API for critical functionality.
 *
 * _Available since v5.1._
 */
library Errors {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error InsufficientBalance(uint256 balance, uint256 needed);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedCall();

    /**
     * @dev The deployment failed.
     */
    error FailedDeployment();

    /**
     * @dev A necessary precompile is missing.
     */
    error MissingPrecompile(address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Return the 512-bit addition of two uint256.
     *
     * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.
     */
    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        assembly ("memory-safe") {
            low := add(a, b)
            high := lt(low, a)
        }
    }

    /**
     * @dev Return the 512-bit multiplication of two uint256.
     *
     * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.
     */
    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use
        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
        // variables such that product = high * 2²⁵⁶ + low.
        assembly ("memory-safe") {
            let mm := mulmod(a, b, not(0))
            low := mul(a, b)
            high := sub(sub(mm, low), lt(mm, low))
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a + b;
            success = c >= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a - b;
            success = c <= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a * b;
            assembly ("memory-safe") {
                // Only true when the multiplication doesn't overflow
                // (c / a == b) || (a == 0)
                success := or(eq(div(c, a), b), iszero(a))
            }
            // equivalent to: success ? c : 0
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `DIV` opcode returns zero when the denominator is 0.
                result := div(a, b)
            }
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `MOD` opcode returns zero when the denominator is 0.
                result := mod(a, b)
            }
        }
    }

    /**
     * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryAdd(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.
     */
    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {
        (, uint256 result) = trySub(a, b);
        return result;
    }

    /**
     * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryMul(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * SafeCast.toUint(condition));
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }

        // The following calculation ensures accurate ceiling division without overflow.
        // Since a is non-zero, (a - 1) / b will not overflow.
        // The largest possible result occurs when (a - 1) / b is type(uint256).max,
        // but the largest value we can obtain is type(uint256).max - 1, which happens
        // when a = type(uint256).max and b = 1.
        unchecked {
            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
        }
    }

    /**
     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     *
     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);

            // Handle non-overflow cases, 256 by 256 division.
            if (high == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return low / denominator;
            }

            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.
            if (denominator <= high) {
                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [high low].
            uint256 remainder;
            assembly ("memory-safe") {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                high := sub(high, gt(remainder, low))
                low := sub(low, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly ("memory-safe") {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [high low] by twos.
                low := div(low, twos)

                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from high into low.
            low |= high * twos;

            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such
            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶
            inverse *= 2 - denominator * inverse; // inverse mod 2³²
            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴
            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is
            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high
            // is no longer required.
            result = low * inverse;
            return result;
        }
    }

    /**
     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
    }

    /**
     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.
     */
    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);
            if (high >= 1 << n) {
                Panic.panic(Panic.UNDER_OVERFLOW);
            }
            return (high << (256 - n)) | (low >> n);
        }
    }

    /**
     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.
     */
    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {
        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);
    }

    /**
     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
     *
     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.
     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
     *
     * If the input value is not inversible, 0 is returned.
     *
     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
     */
    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
        unchecked {
            if (n == 0) return 0;

            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
            // Used to compute integers x and y such that: ax + ny = gcd(a, n).
            // When the gcd is 1, then the inverse of a modulo n exists and it's x.
            // ax + ny = 1
            // ax = 1 + (-y)n
            // ax ≡ 1 (mod n) # x is the inverse of a modulo n

            // If the remainder is 0 the gcd is n right away.
            uint256 remainder = a % n;
            uint256 gcd = n;

            // Therefore the initial coefficients are:
            // ax + ny = gcd(a, n) = n
            // 0a + 1n = n
            int256 x = 0;
            int256 y = 1;

            while (remainder != 0) {
                uint256 quotient = gcd / remainder;

                (gcd, remainder) = (
                    // The old remainder is the next gcd to try.
                    remainder,
                    // Compute the next remainder.
                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
                    // where gcd is at most n (capped to type(uint256).max)
                    gcd - remainder * quotient
                );

                (x, y) = (
                    // Increment the coefficient of a.
                    y,
                    // Decrement the coefficient of n.
                    // Can overflow, but the result is casted to uint256 so that the
                    // next value of y is "wrapped around" to a value between 0 and n - 1.
                    x - y * int256(quotient)
                );
            }

            if (gcd != 1) return 0; // No inverse exists.
            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
        }
    }

    /**
     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
     *
     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that
     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.
     *
     * NOTE: this function does NOT check that `p` is a prime greater than `2`.
     */
    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
        unchecked {
            return Math.modExp(a, p - 2, p);
        }
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
     *
     * Requirements:
     * - modulus can't be zero
     * - underlying staticcall to precompile must succeed
     *
     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
     * sure the chain you're using it on supports the precompiled contract for modular exponentiation
     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly
     * interpreted as 0.
     */
    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
        (bool success, uint256 result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
     * to operate modulo 0 or if the underlying precompile reverted.
     *
     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
     * of a revert, but the result may be incorrectly interpreted as 0.
     */
    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
        if (m == 0) return (false, 0);
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            // | Offset    | Content    | Content (Hex)                                                      |
            // |-----------|------------|--------------------------------------------------------------------|
            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x60:0x7f | value of b | 0x<.............................................................b> |
            // | 0x80:0x9f | value of e | 0x<.............................................................e> |
            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |
            mstore(ptr, 0x20)
            mstore(add(ptr, 0x20), 0x20)
            mstore(add(ptr, 0x40), 0x20)
            mstore(add(ptr, 0x60), b)
            mstore(add(ptr, 0x80), e)
            mstore(add(ptr, 0xa0), m)

            // Given the result < m, it's guaranteed to fit in 32 bytes,
            // so we can use the memory scratch space located at offset 0.
            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
            result := mload(0x00)
        }
    }

    /**
     * @dev Variant of {modExp} that supports inputs of arbitrary length.
     */
    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
        (bool success, bytes memory result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.
     */
    function tryModExp(
        bytes memory b,
        bytes memory e,
        bytes memory m
    ) internal view returns (bool success, bytes memory result) {
        if (_zeroBytes(m)) return (false, new bytes(0));

        uint256 mLen = m.length;

        // Encode call args in result and move the free memory pointer
        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);

        assembly ("memory-safe") {
            let dataPtr := add(result, 0x20)
            // Write result on top of args to avoid allocating extra memory.
            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
            // Overwrite the length.
            // result.length > returndatasize() is guaranteed because returndatasize() == m.length
            mstore(result, mLen)
            // Set the memory pointer after the returned data.
            mstore(0x40, add(dataPtr, mLen))
        }
    }

    /**
     * @dev Returns whether the provided byte array is zero.
     */
    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
        for (uint256 i = 0; i < byteArray.length; ++i) {
            if (byteArray[i] != 0) {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only
     * using integer operations.
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        unchecked {
            // Take care of easy edge cases when a == 0 or a == 1
            if (a <= 1) {
                return a;
            }

            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
            // the current value as `ε_n = | x_n - sqrt(a) |`.
            //
            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is
            // bigger than any uint256.
            //
            // By noticing that
            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`
            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
            // to the msb function.
            uint256 aa = a;
            uint256 xn = 1;

            if (aa >= (1 << 128)) {
                aa >>= 128;
                xn <<= 64;
            }
            if (aa >= (1 << 64)) {
                aa >>= 64;
                xn <<= 32;
            }
            if (aa >= (1 << 32)) {
                aa >>= 32;
                xn <<= 16;
            }
            if (aa >= (1 << 16)) {
                aa >>= 16;
                xn <<= 8;
            }
            if (aa >= (1 << 8)) {
                aa >>= 8;
                xn <<= 4;
            }
            if (aa >= (1 << 4)) {
                aa >>= 4;
                xn <<= 2;
            }
            if (aa >= (1 << 2)) {
                xn <<= 1;
            }

            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).
            //
            // We can refine our estimation by noticing that the middle of that interval minimizes the error.
            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).
            // This is going to be our x_0 (and ε_0)
            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)

            // From here, Newton's method give us:
            // x_{n+1} = (x_n + a / x_n) / 2
            //
            // One should note that:
            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
            //              = ((x_n² + a) / (2 * x_n))² - a
            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a
            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)
            //              = (x_n² - a)² / (2 * x_n)²
            //              = ((x_n² - a) / (2 * x_n))²
            //              ≥ 0
            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n
            //
            // This gives us the proof of quadratic convergence of the sequence:
            // ε_{n+1} = | x_{n+1} - sqrt(a) |
            //         = | (x_n + a / x_n) / 2 - sqrt(a) |
            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
            //         = | (x_n - sqrt(a))² / (2 * x_n) |
            //         = | ε_n² / (2 * x_n) |
            //         = ε_n² / | (2 * x_n) |
            //
            // For the first iteration, we have a special case where x_0 is known:
            // ε_1 = ε_0² / | (2 * x_0) |
            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))
            //     ≤ 2**(e-3) / 3
            //     ≤ 2**(e-3-log2(3))
            //     ≤ 2**(e-4.5)
            //
            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:
            // ε_{n+1} = ε_n² / | (2 * x_n) |
            //         ≤ (2**(e-k))² / (2 * 2**(e-1))
            //         ≤ 2**(2*e-2*k) / 2**e
            //         ≤ 2**(e-2*k)
            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above
            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5
            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9
            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18
            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36
            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72

            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision
            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
            // sqrt(a) or sqrt(a) + 1.
            return xn - SafeCast.toUint(xn > a / xn);
        }
    }

    /**
     * @dev Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // If upper 8 bits of 16-bit half set, add 8 to result
        r |= SafeCast.toUint((x >> r) > 0xff) << 3;
        // If upper 4 bits of 8-bit half set, add 4 to result
        r |= SafeCast.toUint((x >> r) > 0xf) << 2;

        // Shifts value right by the current result and use it as an index into this lookup table:
        //
        // | x (4 bits) |  index  | table[index] = MSB position |
        // |------------|---------|-----------------------------|
        // |    0000    |    0    |        table[0] = 0         |
        // |    0001    |    1    |        table[1] = 0         |
        // |    0010    |    2    |        table[2] = 1         |
        // |    0011    |    3    |        table[3] = 1         |
        // |    0100    |    4    |        table[4] = 2         |
        // |    0101    |    5    |        table[5] = 2         |
        // |    0110    |    6    |        table[6] = 2         |
        // |    0111    |    7    |        table[7] = 2         |
        // |    1000    |    8    |        table[8] = 3         |
        // |    1001    |    9    |        table[9] = 3         |
        // |    1010    |   10    |        table[10] = 3        |
        // |    1011    |   11    |        table[11] = 3        |
        // |    1100    |   12    |        table[12] = 3        |
        // |    1101    |   13    |        table[13] = 3        |
        // |    1110    |   14    |        table[14] = 3        |
        // |    1111    |   15    |        table[15] = 3        |
        //
        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.
        assembly ("memory-safe") {
            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))
        }
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8
        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }

    /**
     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.
     */
    function toUint(bool b) internal pure returns (uint256 u) {
        assembly ("memory-safe") {
            u := iszero(iszero(b))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, int256 a, int256 b) internal pure returns (int256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * int256(SafeCast.toUint(condition)));
        }
    }

    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // Formula from the "Bit Twiddling Hacks" by Sean Eron Anderson.
            // Since `n` is a signed integer, the generated bytecode will use the SAR opcode to perform the right shift,
            // taking advantage of the most significant (or "sign" bit) in two's complement representation.
            // This opcode adds new most significant bits set to the value of the previous most significant bit. As a result,
            // the mask will either be `bytes32(0)` (if n is positive) or `~bytes32(0)` (if n is negative).
            int256 mask = n >> 255;

            // A `bytes32(0)` mask leaves the input unchanged, while a `~bytes32(0)` mask complements it.
            return uint256((n + mask) ^ mask);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)

pragma solidity ^0.8.20;

/**
 * @dev Helper library for emitting standardized panic codes.
 *
 * ```solidity
 * contract Example {
 *      using Panic for uint256;
 *
 *      // Use any of the declared internal constants
 *      function foo() { Panic.GENERIC.panic(); }
 *
 *      // Alternatively
 *      function foo() { Panic.panic(Panic.GENERIC); }
 * }
 * ```
 *
 * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
 *
 * _Available since v5.1._
 */
// slither-disable-next-line unused-state
library Panic {
    /// @dev generic / unspecified error
    uint256 internal constant GENERIC = 0x00;
    /// @dev used by the assert() builtin
    uint256 internal constant ASSERT = 0x01;
    /// @dev arithmetic underflow or overflow
    uint256 internal constant UNDER_OVERFLOW = 0x11;
    /// @dev division or modulo by zero
    uint256 internal constant DIVISION_BY_ZERO = 0x12;
    /// @dev enum conversion error
    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
    /// @dev invalid encoding in storage
    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
    /// @dev empty array pop
    uint256 internal constant EMPTY_ARRAY_POP = 0x31;
    /// @dev array out of bounds access
    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
    /// @dev resource error (too large allocation or too large array)
    uint256 internal constant RESOURCE_ERROR = 0x41;
    /// @dev calling invalid internal function
    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;

    /// @dev Reverts with a panic code. Recommended to use with
    /// the internal constants with predefined codes.
    function panic(uint256 code) internal pure {
        assembly ("memory-safe") {
            mstore(0x00, 0x4e487b71)
            mstore(0x20, code)
            revert(0x1c, 0x24)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC-1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * TIP: Consider using this library along with {SlotDerivation}.
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct Int256Slot {
        int256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Int256Slot` with member `value` located at `slot`.
     */
    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns a `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SafeCast} from "./math/SafeCast.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    using SafeCast for *;

    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;
    uint256 private constant SPECIAL_CHARS_LOOKUP =
        (1 << 0x08) | // backspace
            (1 << 0x09) | // tab
            (1 << 0x0a) | // newline
            (1 << 0x0c) | // form feed
            (1 << 0x0d) | // carriage return
            (1 << 0x22) | // double quote
            (1 << 0x5c); // backslash

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev The string being parsed contains characters that are not in scope of the given base.
     */
    error StringsInvalidChar();

    /**
     * @dev The string being parsed is not a properly formatted address.
     */
    error StringsInvalidAddressFormat();

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            assembly ("memory-safe") {
                ptr := add(add(buffer, 0x20), length)
            }
            while (true) {
                ptr--;
                assembly ("memory-safe") {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its checksummed ASCII `string` hexadecimal
     * representation, according to EIP-55.
     */
    function toChecksumHexString(address addr) internal pure returns (string memory) {
        bytes memory buffer = bytes(toHexString(addr));

        // hash the hex part of buffer (skip length + 2 bytes, length 40)
        uint256 hashValue;
        assembly ("memory-safe") {
            hashValue := shr(96, keccak256(add(buffer, 0x22), 40))
        }

        for (uint256 i = 41; i > 1; --i) {
            // possible values for buffer[i] are 48 (0) to 57 (9) and 97 (a) to 102 (f)
            if (hashValue & 0xf > 7 && uint8(buffer[i]) > 96) {
                // case shift by xoring with 0x20
                buffer[i] ^= 0x20;
            }
            hashValue >>= 4;
        }
        return string(buffer);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }

    /**
     * @dev Parse a decimal string and returns the value as a `uint256`.
     *
     * Requirements:
     * - The string must be formatted as `[0-9]*`
     * - The result must fit into an `uint256` type
     */
    function parseUint(string memory input) internal pure returns (uint256) {
        return parseUint(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseUint-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `[0-9]*`
     * - The result must fit into an `uint256` type
     */
    function parseUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {
        (bool success, uint256 value) = tryParseUint(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseUint-string} that returns false if the parsing fails because of an invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseUint(string memory input) internal pure returns (bool success, uint256 value) {
        return _tryParseUintUncheckedBounds(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseUint-string-uint256-uint256} that returns false if the parsing fails because of an invalid
     * character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseUint(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, uint256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseUintUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseUint-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseUintUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, uint256 value) {
        bytes memory buffer = bytes(input);

        uint256 result = 0;
        for (uint256 i = begin; i < end; ++i) {
            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));
            if (chr > 9) return (false, 0);
            result *= 10;
            result += chr;
        }
        return (true, result);
    }

    /**
     * @dev Parse a decimal string and returns the value as a `int256`.
     *
     * Requirements:
     * - The string must be formatted as `[-+]?[0-9]*`
     * - The result must fit in an `int256` type.
     */
    function parseInt(string memory input) internal pure returns (int256) {
        return parseInt(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseInt-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `[-+]?[0-9]*`
     * - The result must fit in an `int256` type.
     */
    function parseInt(string memory input, uint256 begin, uint256 end) internal pure returns (int256) {
        (bool success, int256 value) = tryParseInt(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseInt-string} that returns false if the parsing fails because of an invalid character or if
     * the result does not fit in a `int256`.
     *
     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.
     */
    function tryParseInt(string memory input) internal pure returns (bool success, int256 value) {
        return _tryParseIntUncheckedBounds(input, 0, bytes(input).length);
    }

    uint256 private constant ABS_MIN_INT256 = 2 ** 255;

    /**
     * @dev Variant of {parseInt-string-uint256-uint256} that returns false if the parsing fails because of an invalid
     * character or if the result does not fit in a `int256`.
     *
     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.
     */
    function tryParseInt(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, int256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseIntUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseInt-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseIntUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, int256 value) {
        bytes memory buffer = bytes(input);

        // Check presence of a negative sign.
        bytes1 sign = begin == end ? bytes1(0) : bytes1(_unsafeReadBytesOffset(buffer, begin)); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        bool positiveSign = sign == bytes1("+");
        bool negativeSign = sign == bytes1("-");
        uint256 offset = (positiveSign || negativeSign).toUint();

        (bool absSuccess, uint256 absValue) = tryParseUint(input, begin + offset, end);

        if (absSuccess && absValue < ABS_MIN_INT256) {
            return (true, negativeSign ? -int256(absValue) : int256(absValue));
        } else if (absSuccess && negativeSign && absValue == ABS_MIN_INT256) {
            return (true, type(int256).min);
        } else return (false, 0);
    }

    /**
     * @dev Parse a hexadecimal string (with or without "0x" prefix), and returns the value as a `uint256`.
     *
     * Requirements:
     * - The string must be formatted as `(0x)?[0-9a-fA-F]*`
     * - The result must fit in an `uint256` type.
     */
    function parseHexUint(string memory input) internal pure returns (uint256) {
        return parseHexUint(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseHexUint-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `(0x)?[0-9a-fA-F]*`
     * - The result must fit in an `uint256` type.
     */
    function parseHexUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {
        (bool success, uint256 value) = tryParseHexUint(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseHexUint-string} that returns false if the parsing fails because of an invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseHexUint(string memory input) internal pure returns (bool success, uint256 value) {
        return _tryParseHexUintUncheckedBounds(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseHexUint-string-uint256-uint256} that returns false if the parsing fails because of an
     * invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseHexUint(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, uint256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseHexUintUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseHexUint-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseHexUintUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, uint256 value) {
        bytes memory buffer = bytes(input);

        // skip 0x prefix if present
        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(buffer, begin)) == bytes2("0x"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        uint256 offset = hasPrefix.toUint() * 2;

        uint256 result = 0;
        for (uint256 i = begin + offset; i < end; ++i) {
            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));
            if (chr > 15) return (false, 0);
            result *= 16;
            unchecked {
                // Multiplying by 16 is equivalent to a shift of 4 bits (with additional overflow check).
                // This guarantees that adding a value < 16 will not cause an overflow, hence the unchecked.
                result += chr;
            }
        }
        return (true, result);
    }

    /**
     * @dev Parse a hexadecimal string (with or without "0x" prefix), and returns the value as an `address`.
     *
     * Requirements:
     * - The string must be formatted as `(0x)?[0-9a-fA-F]{40}`
     */
    function parseAddress(string memory input) internal pure returns (address) {
        return parseAddress(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseAddress-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `(0x)?[0-9a-fA-F]{40}`
     */
    function parseAddress(string memory input, uint256 begin, uint256 end) internal pure returns (address) {
        (bool success, address value) = tryParseAddress(input, begin, end);
        if (!success) revert StringsInvalidAddressFormat();
        return value;
    }

    /**
     * @dev Variant of {parseAddress-string} that returns false if the parsing fails because the input is not a properly
     * formatted address. See {parseAddress-string} requirements.
     */
    function tryParseAddress(string memory input) internal pure returns (bool success, address value) {
        return tryParseAddress(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseAddress-string-uint256-uint256} that returns false if the parsing fails because input is not a properly
     * formatted address. See {parseAddress-string-uint256-uint256} requirements.
     */
    function tryParseAddress(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, address value) {
        if (end > bytes(input).length || begin > end) return (false, address(0));

        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(bytes(input), begin)) == bytes2("0x"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        uint256 expectedLength = 40 + hasPrefix.toUint() * 2;

        // check that input is the correct length
        if (end - begin == expectedLength) {
            // length guarantees that this does not overflow, and value is at most type(uint160).max
            (bool s, uint256 v) = _tryParseHexUintUncheckedBounds(input, begin, end);
            return (s, address(uint160(v)));
        } else {
            return (false, address(0));
        }
    }

    function _tryParseChr(bytes1 chr) private pure returns (uint8) {
        uint8 value = uint8(chr);

        // Try to parse `chr`:
        // - Case 1: [0-9]
        // - Case 2: [a-f]
        // - Case 3: [A-F]
        // - otherwise not supported
        unchecked {
            if (value > 47 && value < 58) value -= 48;
            else if (value > 96 && value < 103) value -= 87;
            else if (value > 64 && value < 71) value -= 55;
            else return type(uint8).max;
        }

        return value;
    }

    /**
     * @dev Escape special characters in JSON strings. This can be useful to prevent JSON injection in NFT metadata.
     *
     * WARNING: This function should only be used in double quoted JSON strings. Single quotes are not escaped.
     *
     * NOTE: This function escapes all unicode characters, and not just the ones in ranges defined in section 2.5 of
     * RFC-4627 (U+0000 to U+001F, U+0022 and U+005C). ECMAScript's `JSON.parse` does recover escaped unicode
     * characters that are not in this range, but other tooling may provide different results.
     */
    function escapeJSON(string memory input) internal pure returns (string memory) {
        bytes memory buffer = bytes(input);
        bytes memory output = new bytes(2 * buffer.length); // worst case scenario
        uint256 outputLength = 0;

        for (uint256 i; i < buffer.length; ++i) {
            bytes1 char = bytes1(_unsafeReadBytesOffset(buffer, i));
            if (((SPECIAL_CHARS_LOOKUP & (1 << uint8(char))) != 0)) {
                output[outputLength++] = "\\";
                if (char == 0x08) output[outputLength++] = "b";
                else if (char == 0x09) output[outputLength++] = "t";
                else if (char == 0x0a) output[outputLength++] = "n";
                else if (char == 0x0c) output[outputLength++] = "f";
                else if (char == 0x0d) output[outputLength++] = "r";
                else if (char == 0x5c) output[outputLength++] = "\\";
                else if (char == 0x22) {
                    // solhint-disable-next-line quotes
                    output[outputLength++] = '"';
                }
            } else {
                output[outputLength++] = char;
            }
        }
        // write the actual length and deallocate unused memory
        assembly ("memory-safe") {
            mstore(output, outputLength)
            mstore(0x40, add(output, shl(5, shr(5, add(outputLength, 63)))))
        }

        return string(output);
    }

    /**
     * @dev Reads a bytes32 from a bytes array without bounds checking.
     *
     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the
     * assembly block as such would prevent some optimizations.
     */
    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {
        // This is not memory safe in the general case, but all calls to this private function are within bounds.
        assembly ("memory-safe") {
            value := mload(add(add(buffer, 0x20), offset))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/TransientSlot.sol)
// This file was procedurally generated from scripts/generate/templates/TransientSlot.js.

pragma solidity ^0.8.24;

/**
 * @dev Library for reading and writing value-types to specific transient storage slots.
 *
 * Transient slots are often used to store temporary values that are removed after the current transaction.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 *  * Example reading and writing values using transient storage:
 * ```solidity
 * contract Lock {
 *     using TransientSlot for *;
 *
 *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.
 *     bytes32 internal constant _LOCK_SLOT = 0xf4678858b2b588224636b8522b729e7722d32fc491da849ed75b3fdf3c84f542;
 *
 *     modifier locked() {
 *         require(!_LOCK_SLOT.asBoolean().tload());
 *
 *         _LOCK_SLOT.asBoolean().tstore(true);
 *         _;
 *         _LOCK_SLOT.asBoolean().tstore(false);
 *     }
 * }
 * ```
 *
 * TIP: Consider using this library along with {SlotDerivation}.
 */
library TransientSlot {
    /**
     * @dev UDVT that represents a slot holding an address.
     */
    type AddressSlot is bytes32;

    /**
     * @dev Cast an arbitrary slot to a AddressSlot.
     */
    function asAddress(bytes32 slot) internal pure returns (AddressSlot) {
        return AddressSlot.wrap(slot);
    }

    /**
     * @dev UDVT that represents a slot holding a bool.
     */
    type BooleanSlot is bytes32;

    /**
     * @dev Cast an arbitrary slot to a BooleanSlot.
     */
    function asBoolean(bytes32 slot) internal pure returns (BooleanSlot) {
        return BooleanSlot.wrap(slot);
    }

    /**
     * @dev UDVT that represents a slot holding a bytes32.
     */
    type Bytes32Slot is bytes32;

    /**
     * @dev Cast an arbitrary slot to a Bytes32Slot.
     */
    function asBytes32(bytes32 slot) internal pure returns (Bytes32Slot) {
        return Bytes32Slot.wrap(slot);
    }

    /**
     * @dev UDVT that represents a slot holding a uint256.
     */
    type Uint256Slot is bytes32;

    /**
     * @dev Cast an arbitrary slot to a Uint256Slot.
     */
    function asUint256(bytes32 slot) internal pure returns (Uint256Slot) {
        return Uint256Slot.wrap(slot);
    }

    /**
     * @dev UDVT that represents a slot holding a int256.
     */
    type Int256Slot is bytes32;

    /**
     * @dev Cast an arbitrary slot to a Int256Slot.
     */
    function asInt256(bytes32 slot) internal pure returns (Int256Slot) {
        return Int256Slot.wrap(slot);
    }

    /**
     * @dev Load the value held at location `slot` in transient storage.
     */
    function tload(AddressSlot slot) internal view returns (address value) {
        assembly ("memory-safe") {
            value := tload(slot)
        }
    }

    /**
     * @dev Store `value` at location `slot` in transient storage.
     */
    function tstore(AddressSlot slot, address value) internal {
        assembly ("memory-safe") {
            tstore(slot, value)
        }
    }

    /**
     * @dev Load the value held at location `slot` in transient storage.
     */
    function tload(BooleanSlot slot) internal view returns (bool value) {
        assembly ("memory-safe") {
            value := tload(slot)
        }
    }

    /**
     * @dev Store `value` at location `slot` in transient storage.
     */
    function tstore(BooleanSlot slot, bool value) internal {
        assembly ("memory-safe") {
            tstore(slot, value)
        }
    }

    /**
     * @dev Load the value held at location `slot` in transient storage.
     */
    function tload(Bytes32Slot slot) internal view returns (bytes32 value) {
        assembly ("memory-safe") {
            value := tload(slot)
        }
    }

    /**
     * @dev Store `value` at location `slot` in transient storage.
     */
    function tstore(Bytes32Slot slot, bytes32 value) internal {
        assembly ("memory-safe") {
            tstore(slot, value)
        }
    }

    /**
     * @dev Load the value held at location `slot` in transient storage.
     */
    function tload(Uint256Slot slot) internal view returns (uint256 value) {
        assembly ("memory-safe") {
            value := tload(slot)
        }
    }

    /**
     * @dev Store `value` at location `slot` in transient storage.
     */
    function tstore(Uint256Slot slot, uint256 value) internal {
        assembly ("memory-safe") {
            tstore(slot, value)
        }
    }

    /**
     * @dev Load the value held at location `slot` in transient storage.
     */
    function tload(Int256Slot slot) internal view returns (int256 value) {
        assembly ("memory-safe") {
            value := tload(slot)
        }
    }

    /**
     * @dev Store `value` at location `slot` in transient storage.
     */
    function tstore(Int256Slot slot, int256 value) internal {
        assembly ("memory-safe") {
            tstore(slot, value)
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

import {Initializable} from "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import {IDecimalConvertible} from "./interfaces/IDecimalConvertible.sol";

abstract contract DecimalConvertibleUpgradeable is
    IDecimalConvertible,
    Initializable
{
    /// @custom:storage-location erc7201:toki.storage.DecimalConvertibleUpgradeable
    struct DecimalConvertibleUpgradeableStorage {
        uint8 _globalDecimals; // the global decimals (lowest common decimals between chains).
        uint8 _localDecimals; // the local decimals for the token (eg. USDT: 6 decimals)
        uint256 _convertRate; // the decimals for the token (eg. USDT->globalDecimals: 12 decimals)
    }

    // keccak256(abi.encode(uint256(keccak256("toki.storage.DecimalConvertibleUpgradeable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant DECIMAL_CONVERTIBLE_UPGRADEABLE_STORAGE_LOCATION =
        0x363bd9d3ac01b05edede66fbb9c4f73d99f1481666c51eee8df34d23a61f4800;

    function globalDecimals() public view override returns (uint8) {
        return _getDecimalConvertibleUpgradeableStorage()._globalDecimals;
    }

    function localDecimals() public view override returns (uint8) {
        return _getDecimalConvertibleUpgradeableStorage()._localDecimals;
    }

    function convertRate() public view override returns (uint256) {
        return _getDecimalConvertibleUpgradeableStorage()._convertRate;
    }

    /* solhint-disable func-name-mixedcase */
    function __DecimalConvertible_init(
        uint8 globalDecimals_,
        uint8 localDecimals_
    ) internal onlyInitializing {
        __DecimalConvertible_init_unchained(globalDecimals_, localDecimals_);
    }

    function __DecimalConvertible_init_unchained(
        uint8 globalDecimals_,
        uint8 localDecimals_
    ) internal onlyInitializing {
        DecimalConvertibleUpgradeableStorage
            storage $ = _getDecimalConvertibleUpgradeableStorage();

        $._globalDecimals = globalDecimals_;
        $._localDecimals = localDecimals_;
        $._convertRate =
            10 ** ((uint256($._localDecimals) - uint256($._globalDecimals)));
    }

    function _GDToLD(uint256 _amountGD) internal view returns (uint256) {
        return
            _amountGD * _getDecimalConvertibleUpgradeableStorage()._convertRate;
    }

    function _LDToGD(uint256 _amountLD) internal view returns (uint256) {
        return
            _amountLD / _getDecimalConvertibleUpgradeableStorage()._convertRate;
    }

    function _getDecimalConvertibleUpgradeableStorage()
        private
        pure
        returns (DecimalConvertibleUpgradeableStorage storage $)
    {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            $.slot := DECIMAL_CONVERTIBLE_UPGRADEABLE_STORAGE_LOCATION
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

/**
 * @title IDecimalConvertible
 * @dev Interface for converting decimals between global and local.
 * For more details on globalDecimals and localDecimals, refer to IPool.
 */
interface IDecimalConvertible {
    /**
     * @dev Returns the global decimals, which is the smallest decimal value among connected pools.
     * @return The global decimals.
     */
    function globalDecimals() external returns (uint8);

    /**
     * @dev Returns the local decimals for the token
     * @return The local decimals for the token.
     */
    function localDecimals() external returns (uint8);

    /**
     * @dev Returns the conversion rate for the token
     * @return The conversion rate for the token.
     */
    function convertRate() external returns (uint256);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

import {ITransferPoolFeeCalculator} from "./ITransferPoolFeeCalculator.sol";
import {IDecimalConvertible} from "./IDecimalConvertible.sol";
import {IStaticFlowRateLimiter} from "./IStaticFlowRateLimiter.sol";

/**
 * @title IPool
 * @dev Interface for the Pool contract. Represents the liquidity pool, implemented using a mechanism called the Delta Algorithm.
 * The Delta Algorithm allows for efficient cross-chain transactions and liquidity management.
 * When a function that could unbalance pools is called, such as minting liquidity, transferring tokens, and withdrawing liquidity,
 * delta calculation can be triggered. It can also be forcefully triggered using callDelta.
 * Refer to the white paper for more details on the Delta Algorithm: https://www.dropbox.com/s/gf3606jedromp61/Delta-Solving.The.Bridging-Trilemma.pdf?dl=0
 *
 * IPool serves as an liquidity pool contract which mints and burns ERC20 LP tokens when liquidity is added and removed from the pool.
 * A pool ID is assigned to each pool contract, which is shared between chains.
 * Majority of the cross-chain and liquidity related functions will be called by the Bridge.
 *
 *
 * Some functions in the Pool execute cross-chain transactions.
 * In cross-chain transactions, it's important to understand the context in which the function is executed and the perspective from which it is viewed.
 * The following terms are related to cross-chain transactions:
 * - Local pool: The pool where the function is being executed.
 * - Peer pool: The pool that is connected to the local pool.
 * - Initiator: The pool that initiates the cross-chain transaction.
 * - Counterparty: The pool that receives the cross-chain transaction.
 * Local pool and Peer pool represent a first-person view, whereas Initiator and Counterparty represent an objective view.
 *
 * The Pool uses two types of units:
 * - GD (Global Decimals): Lowest common decimals units used across the unified liquidity pool. GD can not be greater than LD.
 * - LD (Local Decimals): Decimal units specific to a particular asset token.
 *
 * The Pool uses two types of tokens:
 * - Liquidity provider token (LP token): This token represents the share of liquidity provided by users and is in GD units.
 * - Asset token: This token represents the actual token associated with the Pool, such as USDC or USDT.
 *   When simply referred to as 'token' it means the asset token.
 *
 */
interface IPool is IDecimalConvertible, IStaticFlowRateLimiter {
    /**
     * @dev Struct for the peer pool.
     * In the Delta Algorithm, there is a pool for each token, and these are referred to as a unified liquidity pool.
     * Within the unified liquidity pool, each pool is connected to multiple peer pools. Each pool refers to other connected pools as peer pools.
     * For example, the USDC on ETH pool may connect to peer pools like the USDT on ETH pool or the USDC on BSC pool, among others.
     * @param chainId The chain ID of the peer pool.
     * @param id The ID of the peer pool that is unique within the chain.
     * @param weight The weight that determines the allocation amount of liquidity.
     * The larger the weight, the more balance is allocated.
     * @param balance The balance available for transfer to the peer pool in GD units.
     * @param targetBalance The target balance, representing the ideal balance in GD units.
     * If the balance is less than the targetBalance, an additional eqFee will be charged.
     * @param lastKnownBalance The last known balance of the peer pool in GD units.
     * Unlike balance, it represents the amount that can be transferred from the peer pool to this pool.
     * @param credits The amount of tokens in GD units that can be transferred to the peer pool next time,
     * reducing the cost of cross-chain transactions.
     * @param ready Indicates if the peer pool is ready for transfer.
     */
    struct PeerPoolInfo {
        uint256 chainId;
        uint256 id;
        uint256 weight;
        uint256 balance;
        uint256 targetBalance;
        uint256 lastKnownBalance;
        uint256 credits;
        bool ready;
    }

    /**
     * @dev Struct for the credit information.
     * @param credits The amount of tokens in GD units that can be transferred to the peer pool next time.
     * @param targetBalance The target balance in GD units.
     */
    struct CreditInfo {
        uint256 credits;
        uint256 targetBalance;
    }

    /**
     * @dev Emitted by transfer.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param from The address from which the tokens are transferred.
     * @param amountGD The amount of tokens transferred in GD units.
     * @param eqReward The equilibrium reward for the transfer.
     * @param eqFee The equilibrium fee for the transfer.
     * @param protocolFee The protocol fee for the transfer.
     * @param lpFee The liquidity provider fee for the transfer.
     */
    event Transfer(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountGD,
        uint256 eqReward,
        uint256 eqFee,
        uint256 protocolFee,
        uint256 lpFee
    );

    /**
     * @dev Emitted when tokens are received.
     * @param to The address that receives the tokens.
     * @param amountGD The amount of tokens received in GD units.
     * @param protocolFee The protocol fee for the transfer.
     * @param eqFee The equilibrium fee for the transfer.
     */
    event Recv(
        address to,
        uint256 amountGD,
        uint256 protocolFee,
        uint256 eqFee
    );

    /**
     * @dev Emitted by withdrawRemote.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param from The address from which the tokens are withdrawn.
     * @param amountLP The amount of LP tokens withdrawn in GD units.
     * @param amountLD The amount of asset tokens withdrawn in LD units.
     */
    event WithdrawRemote(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLP,
        uint256 amountLD
    );

    /**
     * @dev Emitted by withdrawLocal.
     *
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param from The address from which the tokens are withdrawn.
     * @param amountLP The amount of LP tokens withdrawn in GD units.
     * @param amountGD The amount of asset tokens withdrawn in GD units.
     * @param to The address that receives the tokens.
     */
    event WithdrawLocal(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLP,
        uint256 amountGD,
        bytes to
    );

    /**
     * @dev Emitted by withdrawCheck.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param amountLP The amount of LP tokens withdrawn in GD units.
     * @param amountGD The amount of asset tokens withdrawn in GD units.
     */
    event WithdrawCheck(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 amountLP,
        uint256 amountGD
    );

    /**
     * @dev Emitted by withdrawConfirm.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param to The address that receives the tokens.
     * @param amountGD The amount of tokens withdrawn in GD units.
     * @param amountMintGD The amount of tokens minted in GD units.
     */
    event WithdrawConfirm(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        uint256 amountGD,
        uint256 amountMintGD
    );

    /**
     * @dev Emitted by sendCredit.
     * @param peerPoolId The ID of the peer pool.
     * @param credits The amount of tokens in GD units that can be transferred to the peer pool next time.
     * @param targetBalance The target balance in GD units.
     */
    event SendCredit(
        uint256 peerPoolId,
        uint256 credits,
        uint256 targetBalance
    );

    /**
     * @dev Emitted by updateCredit.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param credits The amount of tokens in GD units that can be transferred to the peer pool next time.
     * @param targetBalance The target balance in GD units.
     */
    event UpdateCredit(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 credits,
        uint256 targetBalance
    );

    /**
     * @dev Emitted by withdrawInstant.
     * @param from The address from which the tokens are withdrawn.
     * @param amountLP The amount of LP tokens withdrawn in GD units.
     * @param amountGD The amount of asset tokens withdrawn in GD units.
     * @param to The address that receives the tokens.
     */
    event WithdrawInstant(
        address from,
        uint256 amountLP,
        uint256 amountGD,
        address to
    );

    /**
     * @dev Emitted when LP tokens are minted.
     * @param to The address to which the tokens are minted.
     * @param amountLP The amount of LP tokens minted in GD units.
     * @param amountGD The amount of asset tokens minted in GD units.
     */
    event Mint(address to, uint256 amountLP, uint256 amountGD);

    /**
     * @dev Emitted when LP tokens are burned.
     * @param from The address from which the tokens are burned.
     * @param amountLP The amount of LP tokens burned in GD units.
     * @param amountGD The amount of asset tokens burned in GD units.
     */
    event Burn(address from, uint256 amountLP, uint256 amountGD);

    // ============= for admin functions =================

    /**
     * @dev Emitted by setTransferStop.
     * @param stopTransfer The stop transfer status.
     */
    event UpdateStopTransfer(bool stopTransfer);

    /**
     * @dev Emitted when a peer pool is updated.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param weight The weight that determines the allocation amount of liquidity.
     */
    event PeerPoolInfoUpdate(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 weight
    );

    /**
     * @dev Emitted by setDeltaParam.
     * @param batched Indicates if the delta updates are batched. If true, the updates are processed in batch mode.
     * @param swapDeltaBP The basis points for the swap delta.
     * @param lpDeltaBP The basis points for the liquidity provider delta.
     * @param defaultSwapMode The default mode for swaps.
     * @param defaultLPMode The default mode for LP tokens.
     */
    event UpdateDeltaParam(
        bool batched,
        uint256 swapDeltaBP,
        uint256 lpDeltaBP,
        bool defaultSwapMode,
        bool defaultLPMode
    );

    /**
     * @dev Emitted by drawFee.
     * @param to The address to which the fee is transferred.
     * @param amountLD The amount of the fee drawn in LD units.
     */
    event DrawFee(address to, uint256 amountLD);

    /**
     * @dev Emitted when the maximum total deposits are set.
     * @param maxTotalDepositsLD The maximum total deposits allowed in LD units.
     */
    event SetMaxTotalDeposits(uint256 maxTotalDepositsLD);

    /**
     * @dev Mints LP tokens in exchange for depositing assert tokens.
     * Note that asset tokens are transferred by the Bridge contract, not by the Pool contract.
     * @param to The address to which the tokens are minted.
     * @param amountLD The amount of asset tokens to mint in LD units.
     * @return amountGD The amount of asset tokens minted in GD units.
     */
    function mint(
        address to,
        uint256 amountLD
    ) external returns (uint256 amountGD);

    /**
     * @dev Transfers tokens to a peer pool.
     * Note that the Bridge contract performs the transfer token. The Pool only performs delta calculations and updates its internal state.
     *
     * [Flow of a cross-chain transaction]
     * 1. transfer on the initiator <- this function
     * 2. recv on the counterparty
     *
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param from The address from which the  tokens are transferred.
     * @param amountLD The amount of  tokens to transfer in LD units.
     * @param minAmountLD The minimum amount of  tokens to transfer in LD units.
     * Slippage check is done to ensure that the amount after adding the reward and
     * subtracting the fee is greater than or equal to the minimum amount in GD units.
     * @param newLiquidity Indicates if the transfer is new liquidity.
     * @return feeInfo The fee information for the transfer.
     */
    function transfer(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLD,
        uint256 minAmountLD,
        bool newLiquidity
    ) external returns (ITransferPoolFeeCalculator.FeeInfo memory);

    /**
     * @dev Receives tokens from the peer pool.
     * The delta calculation is performed, and the peer pool info of the local pool is updated.
     *
     * [Flow of a cross-chain transaction]
     * 1. transfer on the initiator
     * 2. recv on the counterparty <- this function
     *
     * 1. withdrawRemote on the initiator
     * 2. recv on the counterparty <- this function
     *
     * @param peerChainId The chain id of the peer pool
     * @param peerPoolId The pool id of the peer pool
     * @param to The address to receive the tokens
     * @param feeInfo The fee information
     * @param updateDelta Whether to update the delta like totalLiquidity
     * @return amountLD The amount of tokens received, including rewards
     * @return isTransferred Whether the tokens are transferred
     */
    function recv(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        ITransferPoolFeeCalculator.FeeInfo memory feeInfo,
        bool updateDelta
    ) external returns (uint256 amountLD, bool isTransferred);

    /**
     * @dev Withdraws asset tokens from the peer pool, and in exchange, burn LP tokens locally.
     *
     * [Flow of a cross-chain transaction]
     * 1. withdrawRemote on the initiator <- this function
     * 2. recv on the counterparty
     *
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param from The address from which the tokens are withdrawn.
     * @param amount The amount of LP tokens.
     */
    function withdrawRemote(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amount
    ) external;

    /**
     * @dev Withdraws tokens from a peer pool locally.
     * withdrawLocal burns local LP tokens and uses the balance that the peer pool can send to the local pool to withdraw tokens in the local pool.
     *
     * [Flow of a cross-chain transaction]
     * 1. withdrawLocal on the initiator <- this function
     * 2. withdrawCheck on the counterparty
     * 3. withdrawConfirm on the initiator
     *
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param from The address from which the tokens are withdrawn.
     * @param amount The amount of LP tokens.
     * @param to The address to receive the tokens.
     * @return amountGD The amount of asset tokens withdrawn in GD units.
     */
    function withdrawLocal(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amount,
        bytes calldata to
    ) external returns (uint256 amountGD);

    /**
     * @dev This is the second step in withdrawLocal which executed on the peer pool for withdrawLocal.
     * It checks the balance, and if the balance is insufficient, it transfers tokens up to the balance.
     *
     * [Flow of a cross-chain transaction]
     * 1. withdrawLocal on the initiator
     * 2. withdrawCheck on the counterparty <- this function
     * 3. withdrawConfirm on the initiator
     *
     * @param peerChainId The chain ID of the peer pool (the initiator pool).
     * @param peerPoolId The ID of the peer pool (the initiator pool).
     * @param amountGD The amount of tokens to withdraw in GD units.
     */
    function withdrawCheck(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 amountGD
    ) external returns (uint256 amountSwap, uint256 amountMint);

    /**
     * @dev This is the final step in withdrawLocal which executed on the local pool for withdrawLocal.
     * If the full amount cannot be withdrawn, mint LP tokens to refund the excess burned tokens.
     *
     * [Flow of a cross-chain transaction]
     * 1. withdrawLocal on the initiator
     * 2. withdrawCheck on the counterparty
     * 3. withdrawConfirm on the initiator <- this function
     *
     * @param peerChainId The chain ID of the peer pool (the counterparty pool).
     * @param peerPoolId The ID of the peer pool (the counterparty pool).
     * @param to The address to receive the tokens
     * @param amountGD The amount of tokens to withdraw, capped by `peerPoolInfo.balance`.
     * @param amountToMintGD The amount of tokens to mint when `peerPoolInfo.balance` is insufficient
     * @param updateDelta Whether to update the delta like `totalLiquidity`
     * @return isTransferred Whether the tokens are transferred
     */
    function withdrawConfirm(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        uint256 amountGD,
        uint256 amountToMintGD,
        bool updateDelta
    ) external returns (bool isTransferred);

    /**
     * @dev Sends credit to a peer pool.
     * Credits aims to reduce the processing costs of cross-chain transactions. It can be transferred to the peer pool next time.
     * Updates the local Peer pool info and generates a IBC packet.
     *
     * [Flow of a cross-chain transaction]
     * 1. sendCredit on the initiator <- this function
     * 2. updateCredit on the counterparty
     *
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @return creditInfo The credit information.
     */
    function sendCredit(
        uint256 peerChainId,
        uint256 peerPoolId
    ) external returns (CreditInfo memory);

    /**
     * @dev This is the 2nd step in sendCredit which executed on the peer pool for sendCredit.
     * Updates the peer pool info of the local pool (the counterparty pool) based on the received credit.
     *
     * [Flow of a cross-chain transaction]
     * 1. sendCredit on the initiator
     * 2. updateCredit on the counterparty <- this function
     *
     * @param peerChainId The chain ID of the peer pool (the initiator pool).
     * @param peerPoolId The ID of the peer pool (the initiator pool).
     * @param creditInfo The credit information.
     */
    function updateCredit(
        uint256 peerChainId,
        uint256 peerPoolId,
        CreditInfo memory creditInfo
    ) external;

    /**
     * @dev Withdraws tokens instantly.
     * Instead of using a cross-chain transaction, withdraw instantly from deltaCredit.
     * If deltaCredit is insufficient, withdraw up to deltaCredit.
     * @param from The address from which the tokens are withdrawn.
     * @param amountLP The amount of LP tokens to withdraw in GD units.
     * @param to The address to receive the tokens.
     * @return amountGD The amount of tokens withdrawn in GD units.
     */
    function withdrawInstant(
        address from,
        uint256 amountLP,
        address to
    ) external returns (uint256 amountGD);

    /**
     * @dev Handles failure of recv
     */
    function handleRecvFailure(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        ITransferPoolFeeCalculator.FeeInfo memory feeInfo
    ) external;

    /**
     * @dev Handles failure of withdrawConfirm
     */
    function handleWithdrawConfirmFailure(
        uint256 peerChainId,
        uint256 peerPoolId,
        address to,
        uint256 amountGD,
        uint256 amountToMintGD
    ) external;

    /**
     * @dev Calculates the delta.
     * @param fullMode Indicates if the full mode should be used.
     * If true, even if each pool has an ideal balance, all deltaCredit will be consumed and proportionally distributed to each pool.
     */
    function callDelta(bool fullMode) external;

    /**
     * @dev Sets the transfer stop status.
     * @param transferStop If true, transfer operations are restricted. However, withdrawals are not restricted.
     */
    function setTransferStop(bool transferStop) external;

    /**
     * @dev Registers a peer pool.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param weight The weight of the peer pool.
     */
    function registerPeerPool(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 weight
    ) external;

    /**
     * @dev Activates a peer pool.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     */
    function activatePeerPool(uint256 peerChainId, uint256 peerPoolId) external;

    /**
     * @dev Sets the weight of a peer pool.
     * When the peer pool is activated, it becomes available for transfer.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param weight The weight of the peer pool.
     */
    function setPeerPoolWeight(
        uint256 peerChainId,
        uint256 peerPoolId,
        uint256 weight
    ) external;

    /**
     * @dev Sets the delta parameters.
     * @param batched Indicates if the delta updates are batched.
     * @param swapDeltaBP The basis points for the swap delta.
     * @param lpDeltaBP The basis points for the liquidity provider delta.
     * @param defaultSwapMode The default mode for swaps.
     * @param defaultLPMode The default mode for LP tokens.
     */
    function setDeltaParam(
        bool batched,
        uint256 swapDeltaBP,
        uint256 lpDeltaBP,
        bool defaultSwapMode,
        bool defaultLPMode
    ) external;

    /**
     * @dev Draws a fee from the pool.
     * @param to The address to receive the fee.
     */
    function drawFee(address to) external;

    // ============== for helper ===================

    /**
     * @dev Returns the total liquidity.
     * @return The total liquidity in GD units.
     */
    function totalLiquidity() external view returns (uint256);

    /**
     * @dev Returns the asset token address.
     * @return The asset token address.
     */
    function token() external view returns (address);

    /**
     * @dev Returns the equilibrium fee pool.
     * @return The equilibrium fee pool in GD units.
     */
    function eqFeePool() external view returns (uint256);

    /**
     * @dev Returns the peer pool information.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @return The peer pool information.
     */
    function getPeerPoolInfo(
        uint256 peerChainId,
        uint256 peerPoolId
    ) external view returns (PeerPoolInfo memory);

    /**
     * @dev Calculates the fee for a transfer.
     * @param peerChainId The chain ID of the peer pool.
     * @param peerPoolId The ID of the peer pool.
     * @param from The address from which the tokens are transferred.
     * @param amountLD The amount of tokens to transfer in LD units.
     * @return feeInfo The fee information.
     */
    function calcFee(
        uint256 peerChainId,
        uint256 peerPoolId,
        address from,
        uint256 amountLD
    ) external view returns (ITransferPoolFeeCalculator.FeeInfo memory);

    /**
     * @dev Converts LP tokens in GD units to asset tokens in LD units.
     * @param amountLP The amount of LP tokens in GD units.
     * @return The amount of asset tokens in LD units.
     */
    // solhint-disable-next-line func-name-mixedcase
    function LPToLD(uint256 amountLP) external view returns (uint256);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

/**
 * @dev StaticFlowRateLimiter limits the flow within a certain period.
 * For example, it can be used to limit the amount of ERC20 token transfers.
 */
interface IStaticFlowRateLimiter {
    /**
     * @dev Resets the flow rate limit with a privilege.
     */
    function resetFlowRateLimit() external;

    /**
     * @dev Returns the end of the current period.
     * @return The block number when the current period ends.
     */
    function currentPeriodEnd() external view returns (uint256);

    /**
     * @dev Returns the amount accumulated in the current period.
     * @return The amount accumulated in the current period.
     */
    function currentPeriodAmount() external view returns (uint256);

    /**
     * @dev Returns whether the lock period is applied.
     * @return `true` if the lock period is applied, `false` otherwise.
     */
    function appliedLockPeriod() external view returns (bool);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

interface ITokiErrors {
    error TokiZeroAddress(string message);
    error TokiZeroAmount(string message);
    error TokiZeroValue(string message);

    // user error
    error TokiInsufficientAmount(string name, uint256 value, uint256 needed);
    // pool does not have enough liquidity
    error TokiInsufficientPoolLiquidity(uint256 value, uint256 needed);
    // insufficient allowance for transfer
    error TokiInsufficientAllowance(
        string name,
        uint256 allowance,
        uint256 needed
    );
    error TokiExceed(string name, uint256 value, uint256 limit);
    error TokiExceedAdd(
        string name,
        uint256 current,
        uint256 add,
        uint256 limit
    );

    // only used in PseudoToken, which is just for Testnet
    error TokiContractNotAllowed(string name, address addr);

    error TokiCannotCloseChannel();
    error TokiCannotTimeoutPacket();

    error TokiRequireOrderedChannel();
    error TokiDstOuterGasShouldBeZero();

    error TokiInvalidPacketType(uint8);
    error TokiInvalidRetryType(uint8);
    error TokiInvalidRecipientBytes();
    error TokiNoRevertReceive();
    error TokiRetryExpired(uint256 expiryBlock);
    error TokiInvalidAppVersion(uint256 expected, uint256 actual);
    error TokiNotEnoughNativeFee(uint256 value, uint256 limit);
    error TokiFailToRefund();

    error TokiNoFee();
    error TokiInvalidBalanceDeficitFeeZone();
    error TokiInvalidSafeZoneRange(uint256 min, uint256 max);
    error TokiDepeg(uint256 poolId);
    error TokiUnregisteredChainId(string channel);
    error TokiUnregisteredPoolId(uint256 poolId);

    error TokiSamePool(uint256 poolId, address pool);
    error TokiNoPool(uint256 poolId);
    error TokiPoolRecvIsFailed(uint256 poolId);
    error TokiPoolWithdrawConfirmIsFailed(uint256 poolId);
    error TokiPriceIsNotPositive(int256 value);
    error TokiPriceIsExpired(uint256 updatedAt);

    error TokiDstChainIdNotAccepted(uint256 dstChainId);

    error TokiTransferIsStop();
    error TokiTransferIsFailed(address token, address to, uint256 value);
    error TokiNativeTransferIsFailed(address to, uint256 value);
    error TokiPeerPoolIsNotReady(uint256 peerChainId, uint256 peerPoolId);
    error TokiSlippageTooHigh(
        uint256 amountGD,
        uint256 eqReward,
        uint256 eqFee,
        uint256 minAmountGD
    );
    error TokiPeerPoolIsRegistered(uint256 chainId, uint256 poolId);
    error TokiPeerPoolIsAlreadyActive(uint256 chainId, uint256 poolId);
    error TokiNoPeerPoolInfo();
    error TokiPeerPoolInfoNotFound(uint256 chainId, uint256 poolId);

    error TokiFlowRateLimitExceed(uint256 current, uint256 add, uint256 limit);

    error TokiFallbackUnauthorized(address caller);

    // used in mocks
    error TokiMock(string message);

    // channel upgrade
    error TokiInvalidProposedVersion(string version);
    error TokiChannelNotFound(string portId, string channelId);

    // dex relation errors
    error TokiIllegalSender(address caller);
    error TokiInvalidPoolId(uint256 poolId);

    // Uniswap route errors
    error TokiPathRequired();
    error TokiDiscontinuousPath();
    error TokiUnsupportedCommand();
    error TokiNotFoundPendingAsset(string dstChannel, uint64 sequence);
    error TokiInvalidSwapParams();
    error TokiInvalidCountParams();
    error TokiEmptySwapParams();

    // TokiToken specific errors
    error TokiNotPrimaryChain();

    // merkle proof verification
    error TokiSaleEnded();
    error TokiInvalidRound(uint256 currentRoundId);
    error TokiInvalidMerkleProof();

    error TokiAlreadyClaimed(uint256 windowIndex, address account);
    error TokiInvalidSignature();
    error TokiNonceAlreadyUsed();

    error TokiUnauthorizedAccess(string message, address caller);
    error TokiCooldownActive(uint256 endTime);
    error TokiNotUnlocked();
    error TokiNotReleased();
    error TokiAlreadyUnlocked();
    error TokiInvalidRecipient(string message);
    error TokiInvalidRole(string message);
    error TokiNotMatch(string message, uint256 actual, uint256 expected);
    error TokiNotStarted();
    error TokiAlreadyStarted();
    error TokiInvalidCliff();
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

import {IPool} from "../interfaces/IPool.sol";

/**
 * @title ITransferPoolFeeCalculator
 * @dev Interface for calculating fees for transferring between pools.
 */
interface ITransferPoolFeeCalculator {
    /**
     * @dev Struct for the source pool.
     * @param addr The address of the source pool.
     * @param id The ID of the source pool.
     * @param globalDecimals The global decimals used by the source pool.
     * @param balance The current balance of the source pool in GD (global decimals) units.
     * @param totalLiquidity The total liquidity of the source pool in GD units.
     * @param eqFeePool The equilibrium fee pool of the source pool in GD units.
     */
    struct SrcPoolInfo {
        address addr;
        uint256 id;
        uint8 globalDecimals;
        uint256 balance;
        uint256 totalLiquidity;
        uint256 eqFeePool;
    }

    /**
     * @dev Struct for the calculated fees.
     * @param amountGD The transferring token amount converted to global decimals, from which eqFee and protocolFee are subtracted.
     * @param protocolFee The protocol fee.
     * @param lpFee The liquidity provider fee.
     * @param eqFee The equilibrium fee.
     * @param eqReward The equilibrium reward.
     * @param balanceDecrease Balance reduction in source pool that will update destination pool's last known balance
     */
    struct FeeInfo {
        uint256 amountGD;
        uint256 protocolFee;
        uint256 lpFee;
        uint256 eqFee;
        uint256 eqReward;
        uint256 balanceDecrease;
    }

    /**
     * @dev Calculates the fees for transferring between pools.
     * @param srcPoolInfo The struct of source pool.
     * @param dstPoolInfo The struct of destination pool.
     * @param from The address that transfers the token.
     * @param amountGD The amount of the token in GD units.
     * GD stands for Global Decimals. For more details, please refer to IPool.
     * @return FeeInfo The calculated fees.
     */
    function calcFee(
        SrcPoolInfo calldata srcPoolInfo,
        IPool.PeerPoolInfo calldata dstPoolInfo,
        address from,
        uint256 amountGD
    ) external view returns (FeeInfo memory);

    /**
     * @dev Returns the version of the fee calculator.
     * @return The version string.
     */
    function version() external pure returns (string memory);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

import {Initializable} from "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import {AccessControlUpgradeable} from "@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol";

import {ITokiErrors} from "./interfaces/ITokiErrors.sol";
import {IStaticFlowRateLimiter} from "./interfaces/IStaticFlowRateLimiter.sol";

abstract contract StaticFlowRateLimiter is
    IStaticFlowRateLimiter,
    ITokiErrors,
    Initializable,
    AccessControlUpgradeable
{
    /// @custom:storage-location erc7201:toki.storage.StaticFlowRateLimiter
    struct StaticFlowRateLimiterStorage {
        uint256 _currentPeriodEnd; // The block height at which the current period ends.
        uint256 _currentPeriodAmount; // The amount of flow accumulated in the current period.
        bool _appliedLockPeriod; // The flag to lock the flow rate limiting.
        // TODO: Replace to transient storage when we update evm version to cancun or later.
        uint256 _cancellableAmount; // The amount of flow that can be cancelled.
    }

    // keccak256(abi.encode(uint256(keccak256("toki.storage.StaticFlowRateLimiter")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant STATIC_FLOW_RATE_LIMITER_LOCATION =
        0x0ee2d9de8392a8f17ff2bb7a24b72fd27e2cf4ac5cd7fd56e5bf7bdb439eb000;
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    uint256 public immutable PERIOD; // The period over which the flow is accumulated.
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    uint256 public immutable LOCK_PERIOD; // Rate limiting will be applied during LOCK_PERIOD after exceeding LIMIT.
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    uint256 public immutable LIMIT; // The maximum flow limit within the period.
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    uint256 public immutable THRESHOLD; // The threshold for accumulating flow.

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor(
        uint256 period,
        uint256 lockPeriod,
        uint256 limit,
        uint256 threshold
    ) {
        PERIOD = period;
        LOCK_PERIOD = lockPeriod;
        LIMIT = limit;
        THRESHOLD = threshold;
        _disableInitializers();
    }

    function resetFlowRateLimit() public onlyRole(DEFAULT_ADMIN_ROLE) {
        StaticFlowRateLimiterStorage
            storage $ = _getStaticFlowRateLimiterStorage();
        _resetFlowRateLimit($);
    }

    function currentPeriodEnd() public view returns (uint256) {
        return _getStaticFlowRateLimiterStorage()._currentPeriodEnd;
    }

    function currentPeriodAmount() public view returns (uint256) {
        return _getStaticFlowRateLimiterStorage()._currentPeriodAmount;
    }

    function appliedLockPeriod() public view returns (bool) {
        return _getStaticFlowRateLimiterStorage()._appliedLockPeriod;
    }

    function _checkAndUpdateFlowRateLimit(
        uint256 amount
    ) internal returns (bool) {
        StaticFlowRateLimiterStorage
            storage $ = _getStaticFlowRateLimiterStorage();
        _updatePeriod();

        // Disallow transfers that exceed current rate limit
        if ($._currentPeriodAmount + amount > LIMIT) {
            $._cancellableAmount = 0;

            if (!$._appliedLockPeriod) {
                $._appliedLockPeriod = true;
                $._currentPeriodEnd += LOCK_PERIOD;
            }

            return false;
        }

        if (THRESHOLD < amount) {
            // solhint-disable-next-line no-inline-assembly
            $._cancellableAmount = amount;
            $._currentPeriodAmount += amount;
        } else {
            $._cancellableAmount = 0;
        }

        return true;
    }

    function _cancelFlowRateLimit() internal {
        StaticFlowRateLimiterStorage
            storage $ = _getStaticFlowRateLimiterStorage();

        if ($._currentPeriodAmount < $._cancellableAmount) {
            $._currentPeriodAmount = 0;
        } else {
            $._currentPeriodAmount -= $._cancellableAmount;
        }

        $._cancellableAmount = 0;
    }

    // solhint-disable-next-line func-name-mixedcase
    function __StaticFlowRateLimiter_init(
        address admin
    ) internal onlyInitializing {
        __AccessControl_init();
        _grantRole(DEFAULT_ADMIN_ROLE, admin);
        __StaticFlowRateLimiter_init_unchained();
    }

    // solhint-disable-next-line func-name-mixedcase
    function __StaticFlowRateLimiter_init_unchained()
        internal
        onlyInitializing
    {
        StaticFlowRateLimiterStorage
            storage $ = _getStaticFlowRateLimiterStorage();
        $._currentPeriodEnd = block.number + PERIOD;
    }

    function _updatePeriod() private {
        StaticFlowRateLimiterStorage
            storage $ = _getStaticFlowRateLimiterStorage();

        if ($._currentPeriodEnd < block.number) {
            _resetFlowRateLimit($);
        }
    }

    function _resetFlowRateLimit(
        StaticFlowRateLimiterStorage storage $
    ) private {
        $._currentPeriodEnd = block.number + PERIOD;
        $._currentPeriodAmount = 0;
        $._appliedLockPeriod = false;
    }

    function _getStaticFlowRateLimiterStorage()
        private
        pure
        returns (StaticFlowRateLimiterStorage storage $)
    {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            $.slot := STATIC_FLOW_RATE_LIMITER_LOCATION
        }
    }
}

{
  "evmVersion": "cancun",
  "viaIR": true,
  "optimizer": {
    "enabled": true,
    "runs": 400
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"uint256","name":"period","type":"uint256"},{"internalType":"uint256","name":"lockPeriod","type":"uint256"},{"internalType":"uint256","name":"limit","type":"uint256"},{"internalType":"uint256","name":"threshold","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"implementation","type":"address"}],"name":"ERC1967InvalidImplementation","type":"error"},{"inputs":[],"name":"ERC1967NonPayable","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[],"name":"FailedCall","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"uint256","name":"windowIndex","type":"uint256"},{"internalType":"address","name":"account","type":"address"}],"name":"TokiAlreadyClaimed","type":"error"},{"inputs":[],"name":"TokiAlreadyStarted","type":"error"},{"inputs":[],"name":"TokiAlreadyUnlocked","type":"error"},{"inputs":[],"name":"TokiCannotCloseChannel","type":"error"},{"inputs":[],"name":"TokiCannotTimeoutPacket","type":"error"},{"inputs":[{"internalType":"string","name":"portId","type":"string"},{"internalType":"string","name":"channelId","type":"string"}],"name":"TokiChannelNotFound","type":"error"},{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"address","name":"addr","type":"address"}],"name":"TokiContractNotAllowed","type":"error"},{"inputs":[{"internalType":"uint256","name":"endTime","type":"uint256"}],"name":"TokiCooldownActive","type":"error"},{"inputs":[{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiDepeg","type":"error"},{"inputs":[],"name":"TokiDiscontinuousPath","type":"error"},{"inputs":[{"internalType":"uint256","name":"dstChainId","type":"uint256"}],"name":"TokiDstChainIdNotAccepted","type":"error"},{"inputs":[],"name":"TokiDstOuterGasShouldBeZero","type":"error"},{"inputs":[],"name":"TokiEmptySwapParams","type":"error"},{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"limit","type":"uint256"}],"name":"TokiExceed","type":"error"},{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"uint256","name":"current","type":"uint256"},{"internalType":"uint256","name":"add","type":"uint256"},{"internalType":"uint256","name":"limit","type":"uint256"}],"name":"TokiExceedAdd","type":"error"},{"inputs":[],"name":"TokiFailToRefund","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"TokiFallbackUnauthorized","type":"error"},{"inputs":[{"internalType":"uint256","name":"current","type":"uint256"},{"internalType":"uint256","name":"add","type":"uint256"},{"internalType":"uint256","name":"limit","type":"uint256"}],"name":"TokiFlowRateLimitExceed","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"TokiIllegalSender","type":"error"},{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"TokiInsufficientAllowance","type":"error"},{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"TokiInsufficientAmount","type":"error"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"TokiInsufficientPoolLiquidity","type":"error"},{"inputs":[{"internalType":"uint256","name":"expected","type":"uint256"},{"internalType":"uint256","name":"actual","type":"uint256"}],"name":"TokiInvalidAppVersion","type":"error"},{"inputs":[],"name":"TokiInvalidBalanceDeficitFeeZone","type":"error"},{"inputs":[],"name":"TokiInvalidCliff","type":"error"},{"inputs":[],"name":"TokiInvalidCountParams","type":"error"},{"inputs":[],"name":"TokiInvalidMerkleProof","type":"error"},{"inputs":[{"internalType":"uint8","name":"","type":"uint8"}],"name":"TokiInvalidPacketType","type":"error"},{"inputs":[{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiInvalidPoolId","type":"error"},{"inputs":[{"internalType":"string","name":"version","type":"string"}],"name":"TokiInvalidProposedVersion","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"}],"name":"TokiInvalidRecipient","type":"error"},{"inputs":[],"name":"TokiInvalidRecipientBytes","type":"error"},{"inputs":[{"internalType":"uint8","name":"","type":"uint8"}],"name":"TokiInvalidRetryType","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"}],"name":"TokiInvalidRole","type":"error"},{"inputs":[{"internalType":"uint256","name":"currentRoundId","type":"uint256"}],"name":"TokiInvalidRound","type":"error"},{"inputs":[{"internalType":"uint256","name":"min","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"TokiInvalidSafeZoneRange","type":"error"},{"inputs":[],"name":"TokiInvalidSignature","type":"error"},{"inputs":[],"name":"TokiInvalidSwapParams","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"}],"name":"TokiMock","type":"error"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"TokiNativeTransferIsFailed","type":"error"},{"inputs":[],"name":"TokiNoFee","type":"error"},{"inputs":[],"name":"TokiNoPeerPoolInfo","type":"error"},{"inputs":[{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiNoPool","type":"error"},{"inputs":[],"name":"TokiNoRevertReceive","type":"error"},{"inputs":[],"name":"TokiNonceAlreadyUsed","type":"error"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"limit","type":"uint256"}],"name":"TokiNotEnoughNativeFee","type":"error"},{"inputs":[{"internalType":"string","name":"dstChannel","type":"string"},{"internalType":"uint64","name":"sequence","type":"uint64"}],"name":"TokiNotFoundPendingAsset","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"},{"internalType":"uint256","name":"actual","type":"uint256"},{"internalType":"uint256","name":"expected","type":"uint256"}],"name":"TokiNotMatch","type":"error"},{"inputs":[],"name":"TokiNotPrimaryChain","type":"error"},{"inputs":[],"name":"TokiNotReleased","type":"error"},{"inputs":[],"name":"TokiNotStarted","type":"error"},{"inputs":[],"name":"TokiNotUnlocked","type":"error"},{"inputs":[],"name":"TokiPathRequired","type":"error"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiPeerPoolInfoNotFound","type":"error"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiPeerPoolIsAlreadyActive","type":"error"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"}],"name":"TokiPeerPoolIsNotReady","type":"error"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiPeerPoolIsRegistered","type":"error"},{"inputs":[{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiPoolRecvIsFailed","type":"error"},{"inputs":[{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiPoolWithdrawConfirmIsFailed","type":"error"},{"inputs":[{"internalType":"uint256","name":"updatedAt","type":"uint256"}],"name":"TokiPriceIsExpired","type":"error"},{"inputs":[{"internalType":"int256","name":"value","type":"int256"}],"name":"TokiPriceIsNotPositive","type":"error"},{"inputs":[],"name":"TokiRequireOrderedChannel","type":"error"},{"inputs":[{"internalType":"uint256","name":"expiryBlock","type":"uint256"}],"name":"TokiRetryExpired","type":"error"},{"inputs":[],"name":"TokiSaleEnded","type":"error"},{"inputs":[{"internalType":"uint256","name":"poolId","type":"uint256"},{"internalType":"address","name":"pool","type":"address"}],"name":"TokiSamePool","type":"error"},{"inputs":[{"internalType":"uint256","name":"amountGD","type":"uint256"},{"internalType":"uint256","name":"eqReward","type":"uint256"},{"internalType":"uint256","name":"eqFee","type":"uint256"},{"internalType":"uint256","name":"minAmountGD","type":"uint256"}],"name":"TokiSlippageTooHigh","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"TokiTransferIsFailed","type":"error"},{"inputs":[],"name":"TokiTransferIsStop","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"},{"internalType":"address","name":"caller","type":"address"}],"name":"TokiUnauthorizedAccess","type":"error"},{"inputs":[{"internalType":"string","name":"channel","type":"string"}],"name":"TokiUnregisteredChainId","type":"error"},{"inputs":[{"internalType":"uint256","name":"poolId","type":"uint256"}],"name":"TokiUnregisteredPoolId","type":"error"},{"inputs":[],"name":"TokiUnsupportedCommand","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"}],"name":"TokiZeroAddress","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"}],"name":"TokiZeroAmount","type":"error"},{"inputs":[{"internalType":"string","name":"message","type":"string"}],"name":"TokiZeroValue","type":"error"},{"inputs":[],"name":"UUPSUnauthorizedCallContext","type":"error"},{"inputs":[{"internalType":"bytes32","name":"slot","type":"bytes32"}],"name":"UUPSUnsupportedProxiableUUID","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLP","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"}],"name":"Burn","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLD","type":"uint256"}],"name":"DrawFee","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLP","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"}],"name":"Mint","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"weight","type":"uint256"}],"name":"PeerPoolInfoUpdate","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"protocolFee","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"eqFee","type":"uint256"}],"name":"Recv","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"credits","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"targetBalance","type":"uint256"}],"name":"SendCredit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"dstFlowRateLimiter","type":"address"}],"name":"SetDstFlowRateLimiter","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"maxTotalDepositsLD","type":"uint256"}],"name":"SetMaxTotalDeposits","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"eqReward","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"eqFee","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"protocolFee","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lpFee","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"credits","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"targetBalance","type":"uint256"}],"name":"UpdateCredit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"batched","type":"bool"},{"indexed":false,"internalType":"uint256","name":"swapDeltaBP","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lpDeltaBP","type":"uint256"},{"indexed":false,"internalType":"bool","name":"defaultSwapMode","type":"bool"},{"indexed":false,"internalType":"bool","name":"defaultLPMode","type":"bool"}],"name":"UpdateDeltaParam","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"stopTransfer","type":"bool"}],"name":"UpdateStopTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountLP","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"}],"name":"WithdrawCheck","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountMintGD","type":"uint256"}],"name":"WithdrawConfirm","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLP","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"},{"indexed":false,"internalType":"address","name":"to","type":"address"}],"name":"WithdrawInstant","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLP","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountGD","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"to","type":"bytes"}],"name":"WithdrawLocal","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"peerChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"indexed":false,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountLP","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountLD","type":"uint256"}],"name":"WithdrawRemote","type":"event"},{"inputs":[],"name":"BPS_DENOMINATOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ROUTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amountLD","type":"uint256"}],"name":"LDToLP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"LIMIT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"LOCK_PERIOD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amountLP","type":"uint256"}],"name":"LPToLD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_PEERS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PERIOD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"THRESHOLD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"UPGRADE_INTERFACE_VERSION","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"}],"name":"activatePeerPool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"appliedLockPeriod","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"batched","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"from","type":"address"},{"internalType":"uint256","name":"amountLD","type":"uint256"}],"name":"calcFee","outputs":[{"components":[{"internalType":"uint256","name":"amountGD","type":"uint256"},{"internalType":"uint256","name":"protocolFee","type":"uint256"},{"internalType":"uint256","name":"lpFee","type":"uint256"},{"internalType":"uint256","name":"eqFee","type":"uint256"},{"internalType":"uint256","name":"eqReward","type":"uint256"},{"internalType":"uint256","name":"balanceDecrease","type":"uint256"}],"internalType":"struct ITransferPoolFeeCalculator.FeeInfo","name":"feeInfo","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bool","name":"fullMode","type":"bool"}],"name":"callDelta","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"convertRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"currentPeriodAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"currentPeriodEnd","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultLPMode","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultSwapMode","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"deltaCredit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"}],"name":"drawFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eqFeePool","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"feeBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"feeCalculator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"}],"name":"getPeerPoolInfo","outputs":[{"components":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"uint256","name":"id","type":"uint256"},{"internalType":"uint256","name":"weight","type":"uint256"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"targetBalance","type":"uint256"},{"internalType":"uint256","name":"lastKnownBalance","type":"uint256"},{"internalType":"uint256","name":"credits","type":"uint256"},{"internalType":"bool","name":"ready","type":"bool"}],"internalType":"struct IPool.PeerPoolInfo","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"globalDecimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"","type":"address"},{"components":[{"internalType":"uint256","name":"amountGD","type":"uint256"},{"internalType":"uint256","name":"protocolFee","type":"uint256"},{"internalType":"uint256","name":"lpFee","type":"uint256"},{"internalType":"uint256","name":"eqFee","type":"uint256"},{"internalType":"uint256","name":"eqReward","type":"uint256"},{"internalType":"uint256","name":"balanceDecrease","type":"uint256"}],"internalType":"struct ITransferPoolFeeCalculator.FeeInfo","name":"feeInfo","type":"tuple"}],"name":"handleRecvFailure","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amountGD","type":"uint256"},{"internalType":"uint256","name":"amountToMintGD","type":"uint256"}],"name":"handleWithdrawConfirmFailure","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"uint256","name":"poolId","type":"uint256"},{"internalType":"address","name":"token","type":"address"},{"internalType":"uint8","name":"globalDecimals","type":"uint8"},{"internalType":"uint8","name":"localDecimals","type":"uint8"},{"internalType":"address","name":"feeCalculator","type":"address"},{"internalType":"address","name":"admin","type":"address"},{"internalType":"address","name":"router","type":"address"},{"internalType":"uint256","name":"maxTotalDeposits","type":"uint256"}],"internalType":"struct Pool.InitializeParam","name":"p","type":"tuple"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"localDecimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lpDeltaBP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxTotalDeposits","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amountLD","type":"uint256"}],"name":"mint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"}],"name":"peerPoolInfoIndexSeek","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"peerPoolInfos","outputs":[{"components":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"uint256","name":"id","type":"uint256"},{"internalType":"uint256","name":"weight","type":"uint256"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"targetBalance","type":"uint256"},{"internalType":"uint256","name":"lastKnownBalance","type":"uint256"},{"internalType":"uint256","name":"credits","type":"uint256"},{"internalType":"bool","name":"ready","type":"bool"}],"internalType":"struct IPool.PeerPoolInfo","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"poolId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"proxiableUUID","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"components":[{"internalType":"uint256","name":"amountGD","type":"uint256"},{"internalType":"uint256","name":"protocolFee","type":"uint256"},{"internalType":"uint256","name":"lpFee","type":"uint256"},{"internalType":"uint256","name":"eqFee","type":"uint256"},{"internalType":"uint256","name":"eqReward","type":"uint256"},{"internalType":"uint256","name":"balanceDecrease","type":"uint256"}],"internalType":"struct ITransferPoolFeeCalculator.FeeInfo","name":"feeInfo","type":"tuple"},{"internalType":"bool","name":"updateDelta","type":"bool"}],"name":"recv","outputs":[{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"bool","name":"isTransferred","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"uint256","name":"weight","type":"uint256"}],"name":"registerPeerPool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"callerConfirmation","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"resetFlowRateLimit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"}],"name":"sendCredit","outputs":[{"components":[{"internalType":"uint256","name":"credits","type":"uint256"},{"internalType":"uint256","name":"targetBalance","type":"uint256"}],"internalType":"struct IPool.CreditInfo","name":"creditInfo","type":"tuple"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"batched_","type":"bool"},{"internalType":"uint256","name":"swapDeltaBP_","type":"uint256"},{"internalType":"uint256","name":"lpDeltaBP_","type":"uint256"},{"internalType":"bool","name":"defaultSwapMode_","type":"bool"},{"internalType":"bool","name":"defaultLPMode_","type":"bool"}],"name":"setDeltaParam","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_feeCalculator","type":"address"}],"name":"setFeeCalculator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newMaxTotalDeposits","type":"uint256"}],"name":"setMaxTotalDeposits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"uint256","name":"weight","type":"uint256"}],"name":"setPeerPoolWeight","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"transferStop_","type":"bool"}],"name":"setTransferStop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"swapDeltaBP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalLiquidity","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalWeight","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"from","type":"address"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bool","name":"newLiquidity","type":"bool"}],"name":"transfer","outputs":[{"components":[{"internalType":"uint256","name":"amountGD","type":"uint256"},{"internalType":"uint256","name":"protocolFee","type":"uint256"},{"internalType":"uint256","name":"lpFee","type":"uint256"},{"internalType":"uint256","name":"eqFee","type":"uint256"},{"internalType":"uint256","name":"eqReward","type":"uint256"},{"internalType":"uint256","name":"balanceDecrease","type":"uint256"}],"internalType":"struct ITransferPoolFeeCalculator.FeeInfo","name":"feeInfo","type":"tuple"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"transferStop","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"components":[{"internalType":"uint256","name":"credits","type":"uint256"},{"internalType":"uint256","name":"targetBalance","type":"uint256"}],"internalType":"struct IPool.CreditInfo","name":"creditInfo","type":"tuple"}],"name":"updateCredit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"uint256","name":"amountGD","type":"uint256"}],"name":"withdrawCheck","outputs":[{"internalType":"uint256","name":"amountSwap","type":"uint256"},{"internalType":"uint256","name":"amountMint","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amountGD","type":"uint256"},{"internalType":"uint256","name":"amountToMintGD","type":"uint256"},{"internalType":"bool","name":"updateDelta","type":"bool"}],"name":"withdrawConfirm","outputs":[{"internalType":"bool","name":"isTransferred","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"uint256","name":"amountLP","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawInstant","outputs":[{"internalType":"uint256","name":"amountGD","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"from","type":"address"},{"internalType":"uint256","name":"amountLP","type":"uint256"},{"internalType":"bytes","name":"to","type":"bytes"}],"name":"withdrawLocal","outputs":[{"internalType":"uint256","name":"amountGD","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"peerChainId","type":"uint256"},{"internalType":"uint256","name":"peerPoolId","type":"uint256"},{"internalType":"address","name":"from","type":"address"},{"internalType":"uint256","name":"amountLP","type":"uint256"}],"name":"withdrawRemote","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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